| Main > Main Forum |
| diy coin mech.. |
| (1/2) > >> |
| oldschoolgamer21:
so here is my attempt at a diy coin mech.. things i used for it are some acrylic i got at homedepot for about $10 a reed switch which i got for about $1 (took it out of door chime they sell at the dollar store) and a neodymium magnet about $2 on ebay super glue to put it together and a piece of stainless steel wire.. for the small lever to bring up the magnet when the quarter hits.. took me a few hours to make and it works really well.. im just sharing this lil project cause maybe some will one to try making one to instead of buy one.. its a very simple design and very easy to make.. here is a video of it working... |
| GORF000:
Nice job. It seem to work very well. :cheers: |
| oldschoolgamer21:
--- Quote from: GORF000 on June 20, 2014, 06:33:35 am ---Nice job. It seem to work very well. :cheers: --- End quote --- thanks, trying to make some anyone can do.. |
| mgb:
Nicely done. works very smoothly. I like the use of the magnet and reed switch. |
| oldschoolgamer21:
--- Quote from: mgb on June 22, 2014, 10:48:52 pm ---Nicely done. works very smoothly. I like the use of the magnet and reed switch. --- End quote --- thanks.. its also easy to adjust.. just bend the wire till you hit the sweet spot and it works perfect.. didnt cost much either ... |
| Navigation |
| Message Index |
| Next page |