| Main > Main Forum |
| Can i buy actuators(?) for a HAPP Comp stick to make diagonals a little easier? |
| (1/3) > >> |
| SpatzST:
The little plastic piece underneath the joystick that actually presses the switches.. wasn't sure if its called an actuator but I feel like ive heard that before. I am having some issues hitting diagonals when I need to, feels like im aiming slightly off and missing it. Or is there any modification I can do myself to ease the issue. A little research tells me I may want to get the "white actuator" that the IL Eurosticks use, I cannot find them though. |
| SpatzST:
maybe? |
| mgb:
So what you saying is you currently have a comp? It has a square actuator, right? If that's the case, changing to a different actuator won't help any. You'll notice that the actuator on that stick sits close to the switches which do have levers on them. If you compare it to a super, you'll see the super has a round actuator with switches that have levers on them. You'd probably be better to just change out to supers and then you can tweak those little levers on the switches to get the sweet spot, action wise. |
| Malenko:
wrap your existing actuator in electrical tape? |
| JDFan:
--- Quote from: Malenko on June 23, 2014, 11:23:58 am ---wrap your existing actuator in electrical tape? --- End quote --- ^ that should work -- One other thing to check is what size hole is cut in the CP and is it too small, not allowing the diagonals without hitting the side of the hole (on my bartop I had made the hole a bit too small (IIRC 7/8 inch) and was having trouble with the diagonals - recut the hole to normal button size (1 1/8 inches) and it worked much better. So something to check. |
| Navigation |
| Message Index |
| Next page |