Main > Monitor/Video Forum

Cap Kit lists for Mouser (updated 7/10/15) (now with pics!)

<< < (2/12) > >>

Sarver Systems:
I'll have to cross reference those to Mouser parts, I didn't see any of those 2 listed on their site.

ed12:
for good measure through in the g07/08 flyback,and the 3pin regulator,
i know we are on topic about cap's,but a full rebuild demand's it

ed

Sarver Systems:
Are those available from mouser though? I don't recall seeing any flybacks there.

Can you post a part number on the regulator? I don't have one in front of me at the moment.

ed12:
a few places sell them
they are not adver's here so i dare not list them
google g07/go8 flyback's
it will get u to a www. under cup's
the reg i forget off of the top >ken please chime in<
+ add the horz freq tantalium..this is a common failure point in horz shift/hold/sync-lock-up
it is a small 1  4.7 or less at 16v and must be just about exact

ed

Ken Layton:

--- Quote from: Sarver Systems on June 12, 2014, 03:57:56 pm ---
Can you post a part number on the regulator? I don't have one in front of me at the moment.

--- End quote ---

The Electrohome G07 regulator is a 2SC1106A.

Mouser generally does not carry Japanese semiconductor numbers (2SA, 2SB, 2SC, 2SD, etc), but they do carry American numbers (2N, 1N, etc).

For Japanese semiconductors you want to go to MCM Electronics.

Navigation

[0] Message Index

[#] Next page

[*] Previous page