Main > Monitor/Video Forum

Cap Kit lists for Mouser (updated 7/10/15) (now with pics!)

(1/12) > >>

Sarver Systems:
BULK REPAIR KIT FOR TECHS Cost +/-$272.00
^^^click me for full shopping list^^^
ALUMINUM ELECTROLYTIC

* 25    100uf @ 200V
* 25     330uf @ 50V
* 25     33uf @ 35V
* 25     4.7uf @ 250V
* 100   1uf @ 50V
* 50     1uf @ 250V
* 10     1uf @ 450V
* 100   2.2uf @ 50V
* 25     2.2uf @ 250V
* 25     3.3uf @ 50V
* 25     3.3uf @ 250V
* 100   4.7uf @ 50V
* 25     4.7 @ 250V
* 100   10uf @ 50V
* 30     10uf @ 160V
* 30     10uf @ 250V
* 25     22uf @ 50V
* 25     22uf @ 250V
* 100   47uf @ 50V
* 20     47uf @ 250V
* 100   100uf @ 50V
* 25     100uf @ 160V
* 50     220uf @ 35V
* 30     470uf @ 35V
* 25     1000uf @ 25V
* 25     1000uf @ 35V
* 25     2200uf @ 35VBIPOLAR ALUMINUM ELECTROLYTIC

* 20     1uf @ 50V BP
* 20     4.7uf @ 50V BP
* 20     10uf @ 50V BPTANTALUM

* 10     4.7uf @ 10VFUSES AND PARTS

* 10     1.2A fuse
* 10     3A fuse
* 20     small fuse clips
* 20     large fuse clipsRESISTORS

* 10     1 ohm 1/2W
* 10     4.7k ohm 1/2W    TBATRANSISTORS (optional)

* 5   2SD870 transistor (Bob Roberts)
* 5   2SD1398 transistor   (Bob Roberts)[/list]

Sarver Systems:
PRICE WATCHER$237.92 updated 6/10/14 (no back orders)
$242.82 updated 6/13/14 (no back orders)
$252.93 updated 7/1/14 (no back orders)
$264.07 updated 7/15/14 (no back orders)
$264.07 updated 7/18/14 (2 parts backordered)
$264.07 updated 7/23/14 (no back orders)
$264.07 updated 7/28/14 (2 parts on backorder)
$264.07 updated 8/3/14  (2 parts on backorder)
$264.07 updated 8/7/14  (2 parts on backorder)
$268.59 updated 8/10/14 (added fuse clips, added resistors, 1 part swapped due to backorders, 1 part backordered, see note above.)
$268.59 updated 8/15/14 (2 parts on backorder)
$269.70 updated 8/24/14 (removed fuse clips, added 2 new caps, 3 parts on backorder)
$269.70 updated 8/27/24 (4 parts on backorder)
$269.70 updated 9/1/14 (4 parts on backorder)
$269.90 updated 9/5/14 (4 parts on backorder)
$283.43 updated 9/10/14 (added 1 new cap, 5 parts on backorder)
$283.43 updated 9/12/14 (5 parts on backorder)
$310.43 updated 9/23/14 (added 1 new cap, 5 parts on backorder)
$310.68 updated 10/13/14 (7 parts on backorder)
$272.00 updated 10/27/14 (6 parts on backorder)
$277.00 updated 11/21/14 (3 parts on backorder)
$272.65 updated 12/10/14 (4 parts on backorder)
$272.81 updated 12/30/14 (3 parts on backorder)
$272.81 updated 1/19/15 (4 parts on backorder)
$272.81 updated 2/16/15 (4 parts on backorder)
$272.82 updated 3/27/15 (1 part on backorder)
$272.82 updated 4/27/15 (3 parts on backorder)
$272.82 updated 6/17/15 (1 part on backorder)
$272.82 updated 7/10/15 (1 part on backorder)









Here is the case shown above:

http://www.harborfreight.com/multi-compartment-utility-box-40528.html

But here is a better alternative, since it is larger in size:

http://www.harborfreight.com/toolbox-organizer-with-4-drawers-68238-8143.html

Ken Layton:
Electrohome monitors use pigtail GMA style 1.25 amp fuse for the B+ fuse. I replace it with two of Jameco Electronics # 119280 side terminal fuse clips. The circuit board already has the spots for the fuse clips. Makes replacing fuses a lot easier and cheaper.

Electrohome and several other monitors use a 2SD870 horizontal output transistor.

Wells K7000 uses a 2SD1398 for the horizontal output.

Sarver Systems:
Based on the number of caps in the above list, how many of those parts you posted would you suggest having on hand? Obviously it would depend on how many of that particular monitor, but assuming it was an average mix of monitors....

Ken Layton:
I would keep a couple of the 2SD870 transistors on hand and a couple of the 2SD1398 on hand.

The fuse clips I like to keep 20 on hand. That will do 10 Electrohome G07 monitors.

Navigation

[0] Message Index

[#] Next page

Go to full version