| Main > Lightguns |
| Lightgun Shooter Cab Options |
| << < (2/2) |
| Jollywest:
--- Quote from: BadMouth on May 30, 2014, 04:39:20 pm --- --- Quote from: Jollywest on May 30, 2014, 04:11:20 pm ---However, I've managed to get hold of an America's Army Global VR Machine with one of these boards in it, and once I get the monitor in it working the plan is to do this testing. --- End quote --- ;D Finally! --- End quote --- Lol... :D Yea, I've seen posts from about 6 years ago on about this board, without much progress by the looks of it. |
| maffewl:
That does sound promising, please keep us up to date on your progress. The site linked shows it for $200 MSRP, and with Aimtraks being $100 each, there is some added cost, but not enough to turn me away if it works correctly. Excited to hear your feedback. |
| Jollywest:
--- Quote from: maffewl on May 31, 2014, 10:08:37 am ---That does sound promising, please keep us up to date on your progress. The site linked shows it for $200 MSRP, and with Aimtraks being $100 each, there is some added cost, but not enough to turn me away if it works correctly. Excited to hear your feedback. --- End quote --- Yep will keep you updated. (I noticed you've subscribed to my project announcement thread too, cheers :)) I'm pretty sure that Nanotech don't sell it anymore, correct me if I'm wrong on that one but I know for sure Global VR do but, as I said before though, not cheaply. I hopefully should have the monitor sorted within a fortnight, then I can make some progress on testing. |
| Purple Tophat:
I've been waiting for someone on here to get ahold of one of those. As of a year and a half ago I had found a source for those boards through one of Global VR's distributors for $170 a piece. Obviously I haven't called them since, but if your testing turns out to reveal a great solution, then I'll get back on the line with them, figure out the best price we can get, and pass the info along to everyone. Aside from that, I've since acquired a couple of act labs guns. I plan to put them into HAPP recoil shells (as suggested by BadMouth many moons ago). Just gotta finish moving into this new house and get things sorted out so I can finally resume working on my cabinet! |
| Jollywest:
--- Quote from: Purple Tophat on June 13, 2014, 04:20:44 pm ---I've been waiting for someone on here to get ahold of one of those. As of a year and a half ago I had found a source for those boards through one of Global VR's distributors for $170 a piece. Obviously I haven't called them since, but if your testing turns out to reveal a great solution, then I'll get back on the line with them, figure out the best price we can get, and pass the info along to everyone. --- End quote --- Now that would make it a much more realistic option for a lot of people I'm sure. :) Small update on my side of things - I've sourced a replacement chassis for the monitor, hopefully it will turn up this coming week. |
| Navigation |
| Message Index |
| Previous page |