Author Topic: Taxi 2000 - Minipincab (Read 27723 times)

Pinfritz · « **on:** May 26, 2014, 01:48:16 am »

Soooo...so many inspirations i get from melons and superfrog minipincabs that i decided to begin my own minipincab now.
The idea was one of my favorite pinball of the youth - williams taxi - transformed in a new minipincab design - that means....not like the real big pinballmachine of that -
either a new touch of an checker cab pinball. The images that follows can show you a look from that what i mean.
Some of the features are a electrical opening controlboard - hided buttons on the front and an integrated plunger with that also too.

Pinfritz · « **Reply #1 on:** May 26, 2014, 01:56:48 am »

The wood...an 12mm MDF was bought and cuttedwith an jigsaw.... but the details need a lot of time. Backglassmonitor is now an 15'' but i think it's better to change it to an 17'' - the playfieldmonitor is 22''.
And here now the whole thing at the first big step forward...

Pinfritz · « **Reply #2 on:** May 29, 2014, 06:05:55 pm »

A little update....

Superfrog · « **Reply #3 on:** May 29, 2014, 06:18:47 pm »

I keep a eye on you

Good to see you started a pinball.
Always nice to see some new projects that keeps me from the streets

Fine start, and nice front pics of the Taxi

Pinfritz · « **Reply #4 on:** May 29, 2014, 06:25:39 pm »

Thanks to you superfrog - you had me infected on that Virus

Sorry, but to get the front in 3d need a little more time than i thought....step by step... And the plungerpProblem isn't solved right NOW. I want to get it analog but my win os (German Version have problems)and the vp and fp dont recognise my saitek gamepad analogstick

Pinfritz · « **Reply #5 on:** May 29, 2014, 06:39:29 pm »

...planning the attachment for the backglass

swaffar · « **Reply #6 on:** May 29, 2014, 07:19:23 pm »

I just love these minis... Hopefully you'll finish yours quickly.

Pinfritz · « **Reply #7 on:** May 30, 2014, 05:20:12 pm »

A project get then to be a special one, if you must made your own special tools to solve a problem. Today I had to do on the "upper lip" and i must bend a little wood for it. A couple of years before I had the same problem for the seats of an model of an toy-circus - but that's a different story... Ok - the technique I used was likewise of "Thonet" a austrian furniture manufacturer at the art nuveau. They used steam an pressure to bend wood... I took them in a hot water...but look what I''ve done...that is what I used for them:

Pinfritz · « **Reply #8 on:** May 30, 2014, 05:51:50 pm »

I cutted the shape to make the bend-tool

Pinfritz · « **Reply #9 on:** May 30, 2014, 05:59:12 pm »

Then i took the wood for a little more than an hour in very hot water and used a jigsaw to make the tool.

Pinfritz · « **Reply #10 on:** May 31, 2014, 05:33:58 am »

A little step for the front, but it was the hardest one I think

Pinfritz · « **Reply #11 on:** May 31, 2014, 04:15:59 pm »

I have a question to superfrog or melon... Did you thought about to use BAM or a Ledwiz with your Minipinball?

And if...what is your experience with it? Do you have enough spaces for them?

Superfrog · « **Reply #12 on:** May 31, 2014, 04:43:23 pm »

I didn't use Future piball but I was planed to use it.
Ps3 eye toy or even Kinect is Easy to use, but in my design it didn't fit well.

Greetings

Pinfritz · « **Reply #13 on:** June 28, 2014, 06:17:51 pm »

Next step...

ViriiGuy · « **Reply #14 on:** June 28, 2014, 09:33:39 pm »

Ohhh... I am liking your theme!

Generic Eric · « **Reply #15 on:** June 29, 2014, 12:47:24 am »

@fritz

This is going places!

:CRAZY: Taxi!

jaharr01 · « **Reply #16 on:** June 29, 2014, 12:58:28 am »

Lookin good. The only thing I wished I would have done different on my cab is too groove out the cab sides where the metal edge on the play field is mostly hidden. That way you can remove it from the back instead of removing it from the top and having to take all that stuff apart to get to the wiring

Pinfritz · « **Reply #17 on:** June 29, 2014, 02:11:31 am »

@jaharr01 I will do both....to open from the top (like a car) and from the back

- better to get to the pc-part . I have so much ideas but I will do it step by step. At this moment it can be go in two ways. Every false step can destroy the good imagine of the project or it goes to be an epic one.... I do my best! Let us see....

Pinfritz · « **Reply #18 on:** July 03, 2014, 01:07:24 am »

Working on details are so....

jaharr01 · « **Reply #19 on:** July 04, 2014, 07:44:00 pm »

Alright pinfritz, I have got to know What is that piece in the thread I replied to I'm trying to figure it out

Jay

Pinfritz · « **Reply #20 on:** July 05, 2014, 09:27:18 am »

I loved it when the plan comes together....its like an 3d puzzle

Pinfritz · « **Reply #21 on:** July 05, 2014, 09:28:34 am »

...and so on

jaharr01 · « **Reply #22 on:** July 05, 2014, 02:39:24 pm »

+++1 That is unique and innovative. I'm impressed

Jay

Pinfritz · « **Reply #23 on:** July 06, 2014, 05:36:58 pm »

@Generic Eric

oooh Yeeeesss...of course, crazy taxi and a dreamcast section will be a big point on my to do list

@jaharr01 thank you... I do my best..the wooden part is not really my best part of my profession - I am a technician and repair and proof electronic circuits

xray is a special part of it but this all can't help me on this project - I only will modify a few buttons/transform little pocket lamps into buttons...but you will see it by the next steps - at first the wooden part must find an end. There's so much to do.... At the playfield monitor fixation and the front and so on...

Pinfritz · « **Reply #24 on:** July 13, 2014, 05:07:14 pm »

Details update...

Pinfritz · « **Reply #25 on:** July 13, 2014, 05:09:33 pm »

It looks so easy, but it was so much work on the details...

Superfrog · « **Reply #26 on:** July 13, 2014, 06:17:16 pm »

I feel your pain, bud keep on going

Malenko · « **Reply #27 on:** July 13, 2014, 06:19:06 pm »

that front looks downright amaze balls

Pinfritz · « **Reply #28 on:** July 13, 2014, 06:44:54 pm »

sometimes i wish i had decided to a normal front-decal....

Superfrog · « **Reply #29 on:** July 13, 2014, 07:11:20 pm »

Bud at the end it's a unieke Masterpiece... Hang on

Malenko · « **Reply #30 on:** July 13, 2014, 07:57:01 pm »

Quote from: Superfrog on July 13, 2014, 07:11:20 pm

Bud at the end it's a unieke Masterpiece... Hang on

^This.

Pinfritz · « **Reply #31 on:** July 14, 2014, 01:37:33 am »

That's now how it looks like...

Pinfritz · « **Reply #32 on:** July 14, 2014, 09:56:57 am »

A little summary...

Pinfritz · « **Reply #33 on:** July 16, 2014, 10:45:44 am »

It seems like an endless story $:-\$

Pinfritz · « **Reply #34 on:** July 17, 2014, 02:33:46 am »

....yeeeeeesss

Pinfritz · « **Reply #35 on:** July 28, 2014, 07:07:26 am »

It get more and more 3d

Superfrog · « **Reply #36 on:** July 28, 2014, 10:53:57 am »

Maybe when you finished this custom pinball, you can get a job at West-coast Custom cars

Looks good

BzZziLLa · « **Reply #37 on:** July 28, 2014, 10:59:01 am »

Wow. Really cool.

Pinfritz · « **Reply #38 on:** July 28, 2014, 11:07:20 am »

Quote from: Superfrog on July 28, 2014, 10:53:57 am

Maybe when you finished this custom pinball, you can get a job at West-coast Custom cars

Looks good

Ohhh Yesss...but for real ...its really really more trickier than the extra circuit for my arduino-board that i will be use for this cab.

Pinfritz · « **Reply #39 on:** August 02, 2014, 08:35:07 am »

Superfrog · « **Reply #40 on:** August 02, 2014, 11:53:57 am »

Is that a Taxi or not

Great work you did on this one.
If that is the standard for the rest of you building process, then it's gonna be a ACE

SpaceHedgehog · « **Reply #41 on:** August 02, 2014, 12:19:56 pm »

Yup, that's some mighty intricate woodworking right there. Should be a real visual feast when it's done.

swaffar · « **Reply #42 on:** August 05, 2014, 12:40:04 pm »

the build is coming alone nicely. can't wait to see this one finished.

Pinfritz · « **Reply #43 on:** August 13, 2014, 03:57:50 pm »

Thanks fo the compliments....now it's gone a little slow because I'm for 3 weeks on holiday and some parts was separated at home and some parts were here by me...but now all parts are already together again (only without the pc)

Superfrog · « **Reply #44 on:** August 13, 2014, 05:00:15 pm »

looking very slick and unique

AlienInferno · « **Reply #45 on:** August 13, 2014, 05:17:44 pm »

I like it. Looks great from the front. Going to be really neat once it's painted and the artwork is applied.

Pinfritz · « **Reply #46 on:** August 16, 2014, 04:15:07 pm »

...as more the project goes on and on...i get more and more grey hairs. One problem is solved, two problems get opened...pfff

Pinfritz · « **Reply #47 on:** August 17, 2014, 06:49:20 am »

...at last the playfield monitor fits perfectly

Pinfritz · « **Reply #48 on:** August 19, 2014, 04:27:54 pm »

I think very hard of my backdoor-solution...any suggestions?

Superfrog · « **Reply #49 on:** August 19, 2014, 04:33:23 pm »

about what ? coolers, buttons, power how to attach?
See my pinball if you need some advice

Pinfritz · « **Reply #50 on:** August 19, 2014, 04:42:27 pm »

How to attach...I will do it in that way, that u can't see the attachement... Both Backdoors with a furniturekey but how to attach a 8mm mdf invisible?

Pinfritz · « **Reply #51 on:** August 19, 2014, 04:44:21 pm »

I study your work too...but I can't see the backdoor opened...

Superfrog · « **Reply #52 on:** August 19, 2014, 04:55:38 pm »

http://forum.arcadecontrols.com/index.php/topic,131566.40.html

On my popeye thread your find a image of the backdoor.

It's very Easy to make.

Pinfritz · « **Reply #53 on:** August 19, 2014, 05:08:43 pm »

Ahhh I see your clamp-solution....

...I will do it valvular and search for a ~invisible~ furniture solution...

Pinfritz · « **Reply #54 on:** August 20, 2014, 12:49:35 am »

if i have no better way to do...then i will do it your way.... the whole night i can't sleep well

Pinfritz · « **Reply #55 on:** August 25, 2014, 01:47:07 pm »

Ok...I think a have a better way that works for me fine...but more in a few days...meanwhile I had a little progress on other places...
In this day's, it looks a little bit like an battlefield

Pinfritz · « **Reply #56 on:** August 26, 2014, 02:56:34 pm »

Superfrog · « **Reply #57 on:** August 26, 2014, 03:24:59 pm »

I found the clam solution for me better, because I don't have to pull back the whole machine back to open the backdoors.

Bud good progress

Pinfritz · « **Reply #58 on:** August 26, 2014, 03:35:40 pm »

I understand...everybody needs his own solution...this work for me perfectly because I would have a build on the box door without a gap. So...it's ok...but for me I must need also a key now to open the backlightbox

Pinfritz · « **Reply #59 on:** August 27, 2014, 05:19:48 am »

I know.... it looks a little bit unusual, but this could be my lockdownbar.....

Pinfritz · « **Reply #60 on:** August 27, 2014, 06:44:14 am »

For me it make sense but it look a little bit in confusion I know..

Pinfritz · « **Reply #61 on:** September 21, 2014, 11:33:30 am »

A little step forward on the frontside...

AlienInferno · « **Reply #62 on:** September 21, 2014, 11:52:18 am »

Nestafari · « **Reply #63 on:** September 21, 2014, 11:25:44 pm »

Are you kidding me..this project is awesome

Malenko · « **Reply #64 on:** September 22, 2014, 09:31:18 am »

I had a very similar idea for my lockdown bar on my theoretical Vpin cab, cant wait to see how you impliment it (might save me some design headaches)

Pinfritz · « **Reply #65 on:** October 01, 2014, 04:37:08 am »

I can't wait too , but for me it is now more important to find some solutions on other places....like the lower backdoor, the selfmade buttons, and so on.... at first I must redesign my location of the Plunger. It is to close to the playfieldmonitor therefore...what do you think, is it a bad place or its ok? From here (red) to here (yellow)...

johnrt · « **Reply #66 on:** October 01, 2014, 05:58:12 am »

Quote from: Pinfritz on October 01, 2014, 04:37:08 am

I can't wait too , but for me it is now more important to find some solutions on other places....like the lower backdoor, the selfmade buttons, and so on.... at first I must redesign my location of the Plunger. It is to close to the playfieldmonitor therefore...what do you think, is it a bad place or its ok? From here (red) to here (yellow)...

The best would have been to keep it where it is (Red). Is it any chance to build a mechanism that avoids the playfield monitor? Like some kind of angled plunger mechanism?

Pinfritz · « **Reply #67 on:** October 01, 2014, 06:19:23 am »

the attachment and the monitor are to close to the middle of the hole for the Plunger.... I must decide between a functionally lighted button for "launchball" or a nonilluminated fakebutton for the Plunger that are maybe to close to the monitor....

Pinfritz · « **Reply #68 on:** October 04, 2014, 04:51:06 pm »

News from the PC-backdoor and more...

Pinfritz · « **Reply #69 on:** October 07, 2014, 01:51:49 am »

@johnrt i think it's not possible ...to tiny and to close to the monitor for a mechanism like that $:-\$ (at the beginning i thought the angle was enough but for

it isn't)

Malenko · « **Reply #70 on:** October 07, 2014, 08:17:18 am »

I get that you lose symmetry by moving it, but I think function is more important than form. So, I dont see the harm in having it lower.

Superfrog · « **Reply #71 on:** October 07, 2014, 12:02:01 pm »

Quote from: Pinfritz on October 01, 2014, 06:19:23 am

the attachment and the monitor are to close to the middle of the hole for the Plunger.... I must decide between a functionally lighted button for "launchball" or a nonilluminated fakebutton for the Plunger that are maybe to close to the monitor....

Can you make a picture from the top of the cab, so I can see how much room you are talking about.
If I'm correct, you want the plunger on the left side of the right headlights and the launch button below in the orange light, or next to the plunger on the right?

You can place the plunger in the right orange light and the launch button in place where you had the plunger in mind. or do I missing something here ?

Pinfritz · « **Reply #72 on:** October 08, 2014, 12:35:59 am »

i can make this picture in 2 weeks...we have any birthdaypartys and no time to work

....but it was at first planned to integrated the plunger IN the "Glass" of the left headlight on the rightside.... im rethinking of this because its to less space there and would replace it BETWEEN the yellow Button...make the headlight i would decided before, as a "start" or "launchball" button

Pinfritz · « **Reply #73 on:** October 08, 2014, 12:54:06 am »

For the "New" placed Plunger the symmetry is much better than the old place but not in mind as a pinballfront

nordemoniac · « **Reply #74 on:** October 09, 2014, 02:57:50 pm »

Wow, this is awesome! Great work!

Pinfritz · « **Reply #75 on:** October 16, 2014, 12:39:37 am »

thank u all, but i think i still have so much work to do on this project...

Pinfritz · « **Reply #76 on:** October 29, 2014, 02:36:11 am »

hi folks...if you do on a pincab or a minipincab too, which pc configuration do u have.... (i think my mainboard is gone $:-\$ )

njay · « **Reply #77 on:** October 29, 2014, 03:09:56 am »

Running a simple dual core cpu nothing more

Graphic card is more important with minimal 2gb of vram

check out my build thread first few pictures you can see the mobo type plus cpu

BorgDog · « **Reply #78 on:** October 29, 2014, 11:54:52 am »

I'm running an inexpensive mini-itx and pentium along with a decent mid-range Radeon graphics card. I have no problems at all with my setup.

Details can be found on my build thread at VPForums, http://www.vpforums.org/index.php?showtopic=29303&hl=

Pinfritz · « **Reply #79 on:** November 03, 2014, 11:14:45 am »

ok...i've now ordered some stuff (MSI H81M-P33 V2 (7846-050R) with an Intel Core i3-4160, 2x 3.60GHz) ...the mainboard has an Intel HD Graphics 4400, 350-1150MHz, for max. 3 Displays ONBOARD.... is this enough or should i get an Graficcard too...and if ...which do u prefer?!? i want to go no more as 150€ for an graficcard is it possible?

BorgDog · « **Reply #80 on:** November 03, 2014, 02:44:31 pm »

I've read of at least one person over at vpforums that is using the integrated graphics. I'd go ahead and give it a try and if you have problems you can always upgrade later. I went with a Radeon R7 250E and haven't had any issues. cost me around $70 on sale with a rebate.

Speed Racer · « **Reply #81 on:** November 03, 2014, 03:14:48 pm »

Having a dedicated video card is preferred, but I think it will depend on what software you are going to run. If anything will run with onboard graphics I'm guessing it will be Visual Pinball.

To be honest, I didn't even try to run my setup without a video card, so I don't really know what performance will be like

I picked up a used GeForce GTX460 for my build. There are plenty of these under $100 (and that's probably overpriced). I have had no problem running Visual Pinball, Future Pinball or Pinball FX2.

Keep up the good work! Your cab looks amazing so far

PL1 · « **Reply #82 on:** November 03, 2014, 04:07:18 pm »

The other thing to consider is the resolution of the tables you want to run.

For higher resolution tables, onboard video may not be able to keep up. I had to upgrade from onboard video to an Evga GeForce GT 430 card to keep the Doctor Who backglass from looking like Tom Baker's scarf.

Scott

Pinfritz · « **Reply #83 on:** November 03, 2014, 05:14:23 pm »

okok....i understand...i will Keep the Level high but not to expensive...is an Asus-Nvidia-GeForce-GTX750 a good choice to go with? ist not so expensive and i hope it fits well on vp/fp and emulators...?
At the moment my piggy bank is a little bit empty and the mb desaster was a little bit unexpectedly - but now i will benefit to come to an upgrade. MB, Processor are ordered now... only a new graficcard is missing

PL1 · « **Reply #84 on:** November 03, 2014, 07:34:15 pm »

There are some closely-numbered EVGA cards in the 700 series with a huge difference in specs.

The GTX 750 looks great (80GB/s Memory Bandwidth), but the GT 740 next to it isn't nearly as good. (28.5GB/s Memory Bandwidth)

The easiest way is to check out the specs on this page then use the part number to price-check the exact model (01G-P4-2751-KR for the GTX 750 linked above) at the vendor of your choice.

You may also want to look at their 600 series cards like the GT 630 (01G-P3-2632-KR) since budget is an issue.

Scott

Pinfritz · « **Reply #85 on:** November 13, 2014, 06:28:14 am »

I took the TI Version

BorgDog · « **Reply #86 on:** November 13, 2014, 08:48:23 am »

That should definitely do the trick.

On a side note, every time I see you have updated this thread I get all excited, you are doing some awesome work, we just need more of it

Pinfritz · « **Reply #87 on:** November 13, 2014, 09:41:42 am »

Sorry for that.... I would also do more and faster on the cab, but now I will build the pc system up and running well. I know, I have too less time that I need for that at the moment - sorry

Pinfritz · « **Reply #88 on:** June 17, 2015, 05:00:26 am »

all parts from the front

Malenko · « **Reply #89 on:** June 17, 2015, 04:43:22 pm »

Yay an update!

Speed Racer · « **Reply #90 on:** June 17, 2015, 04:48:49 pm »

Good to see this project is still alive!

Pinfritz · « **Reply #91 on:** June 17, 2015, 05:18:58 pm »

Ohhh yes...ist's more than alive. I had so much to do on the frontend (PinballX) and the tables...not finished but it works...also with BAM

here a in progress video i know the cam s bad...my htc had a camera failure

Had to renew the backdoors, must to do the wirering and the lockdownbar....
too less time at the Moment :/

Pinfritz · « **Reply #92 on:** June 17, 2015, 05:28:50 pm »

new backside...

Pinfritz · « **Reply #93 on:** June 18, 2015, 05:26:37 am »

a few details ...button modifications...

wp34 · « **Reply #94 on:** June 18, 2015, 02:01:11 pm »

That grill is bad ass.

Very nice.

emphatic · « **Reply #95 on:** June 21, 2015, 12:25:51 pm »

Quote from: wp34 on June 18, 2015, 02:01:11 pm

That grill is bad ass.

Exactly this.

johnrt · « **Reply #96 on:** June 21, 2015, 12:38:53 pm »

Quote from: wp34 on June 18, 2015, 02:01:11 pm

That grill is bad ass.

No.. THIS is bad ass:

No seriously: This is a kick ass build!

mafiafan123 · « **Reply #97 on:** June 21, 2015, 11:37:11 pm »

Looks really nice keep it going this should turn out amazing.

Pinfritz · « **Reply #98 on:** June 22, 2015, 01:39:02 am »

thanks for the compliments but i'm beeing a little ashamed to be so slow...
but i have to less time, and my slogan is also - Take time, do it exceptionally

Pinfritz · « **Reply #99 on:** June 22, 2015, 01:40:34 am »

Quote from: johnrt on June 21, 2015, 12:38:53 pm

Quote from: wp34 on June 18, 2015, 02:01:11 pm
That grill is bad ass.
No.. THIS is bad ass:

No seriously: This is a kick ass build!

btw... nice ass...strong pants

Blackknight2000 · « **Reply #100 on:** June 29, 2015, 09:43:24 pm »

This Cabinet is looking amazing! Can't wait to see the final product!

Pinfritz · « **Reply #101 on:** June 30, 2015, 06:32:34 am »

how close it is on the backside of the front

Pinfritz · « **Reply #102 on:** September 14, 2015, 12:43:57 am »

...a little update

Superfrog · « **Reply #103 on:** September 14, 2015, 11:48:30 am »

Great update Fritz,

You do it the right way, don't hurry

Greetings

Pinfritz · « **Reply #104 on:** September 14, 2015, 12:03:06 pm »

Thanks @Superfrog...i would go a similar way with an emulator for mame and so on too. What was your way with the frontends? I use for the pinballpart PinaballX but to include a Dreamcast Emulator like Nulldc it is very hard to work with it. Which frontend is your first to wake up after an PowerON? And also to use as an Musicbox with the cabinet...it's tricky...i didnt get it which is the best way to include all

Superfrog · « **Reply #105 on:** September 14, 2015, 12:57:04 pm »

My first frontend was HyperSpin and from the menu base ( Mame / Snes/ Megadrive / Pinball ) I let start PinballX after you select the option Pinball.

Good luck

ps: Personal, I fond HyperSpin a pain in the Ass to config, I did use the latest versions.
Youtube did show me how to do some stuff

Pinfritz · « **Reply #106 on:** October 05, 2015, 12:42:18 am »

a little update...

Malenko · « **Reply #107 on:** October 05, 2015, 01:58:01 pm »

yay progress!

AlienInferno · « **Reply #108 on:** October 10, 2015, 03:48:54 pm »

The front of this cab still looks amazing. A question on the lock down bar piece. It seems like on the sides it's a pretty big lip. How does that feel on your hands/wrists when pressing the flipper buttons? The way I rest my hands when playing it seems like it would get in the way.

Pinfritz · « **Reply #109 on:** October 11, 2015, 05:52:06 am »

Quote from: AlienInferno on October 10, 2015, 03:48:54 pm

The front of this cab still looks amazing. A question on the lock down bar piece. It seems like on the sides it's a pretty big lip. How does that feel on your hands/wrists when pressing the flipper buttons? The way I rest my hands when playing it seems like it would get in the way.

ohh...i know it looks a little bit unusual, but ist very comfortly . The main thing about this piece of lip is there comes a controllerpart in it

- I would like to integrate an controller for playing "crazy taxi" or something like this with the dreamcast emulation. When it's really uncomfortly then i work on a pinballonlylockdownbar for changing... i will see - On my first design it had an spinner for Arkanoid-like-games too

Pinfritz · « **Reply #110 on:** September 03, 2016, 08:23:59 am »

Gesendet von meinem HTC One M9 mit Tapatalk

Pinfritz · « **Reply #111 on:** September 03, 2016, 08:24:56 am »

Gesendet von meinem HTC One M9 mit Tapatalk

Pinfritz · « **Reply #112 on:** September 03, 2016, 08:26:11 am »

Gesendet von meinem HTC One M9 mit Tapatalk

Pinfritz · « **Reply #113 on:** September 03, 2016, 08:27:10 am »

Gesendet von meinem HTC One M9 mit Tapatalk

Pinfritz · « **Reply #114 on:** September 03, 2016, 08:29:50 am »

Gesendet von meinem HTC One M9 mit Tapatalk

Nephasth · « **Reply #115 on:** September 03, 2016, 08:55:24 am »

Quote from: Pinfritz on September 03, 2016, 08:24:56 am

Gesendet von meinem HTC One M9 mit Tapatalk

Impressive.

thomas_surles · « **Reply #116 on:** September 03, 2016, 01:56:10 pm »

This looks pretty sweet. Nice work.

Richie_jones · « **Reply #117 on:** September 05, 2016, 05:12:15 pm »

Looks great..what's your plans side art etc?

Sent from my SM-N930F using Tapatalk

Malenko · « **Reply #118 on:** September 05, 2016, 07:57:38 pm »

Glad to ee you still plugging away a this. The look is still awesome and I cant wait to see the finished product!

Pinfritz · « **Reply #119 on:** September 06, 2016, 07:18:26 am »

Sorry, but allways too less time for this project...

...but i have now an eye on the controls at the lockdownbar - i must rethink and customize all for this little size ...sidearts...puuhh....i was thinking a very long time to decide now.. None (or very small) side arts - the most space i need for the side "art" is to illuminate a white plexi that will be covered with the black/white taxi Patterns

nordemoniac · « **Reply #120 on:** September 10, 2016, 07:10:46 pm »

This project is awesome!

Pinfritz · « **Reply #121 on:** September 25, 2016, 02:08:24 pm »

Gesendet von meinem HTC One M9 mit Tapatalk

Pinfritz · « **Reply #122 on:** September 25, 2016, 02:08:51 pm »

Gesendet von meinem HTC One M9 mit Tapatalk

Superfrog · « **Reply #123 on:** March 28, 2018, 06:35:34 am »

How is the buildingproces coming along?

Still working on it or already finished?

Would like to see the Final pictures


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news