Main > Raspberry Pi & Dev Board

Arduino, AVR, Rasberry Pi, Oh my!

<< < (2/2)

Slippyblade:

--- Quote from: PL1 on May 19, 2014, 07:23:29 pm ---The 16k and 32k Minimus boards come pre-programmed with the bootloader which allows code to be programmed inside the chip without any external programmer, just download the KADE Loader or FLIP software from Atmel's web site to load your HEX code.

The MattairTech boards like KADESTICK allow you to chose which bootloader (CDC - Arduino, DFU - FLIP, or Atmel DFU - FLIP) you want when you order the board.

None of the KADE-related boards require an external programmer, but KADESTICK and newer prototypes have the needed socket holes for the ISP 2x3 pin header (next to the USB connector below) if you want to use one.

IIRC, there are some boards out there that don't come with a bootloader -- those require an external programmer.

--- End quote ---

This is awesome info, thanks!  This is exactly the kind of stuff I was hoping to get when I made the thread.

Navigation

[0] Message Index

[*] Previous page