| Main > Main Forum |
| IPAC Programming special chars. |
| << < (2/2) |
| AndyWarne:
--- Quote from: DeLuSioNal29 on April 26, 2014, 05:54:42 pm ---I use the following additional keys which work for me on my 4-player panel: \ / [ ] ' 0 - = , . D --- End quote --- All of those will work because you can assign any key to any input. But it is any KEY rather than any character as its a keyboard device. So for example $ and 4 are both the same KEY. |
| AndyWarne:
--- Quote from: billf1 on April 26, 2014, 06:45:14 pm --- I was planning on a couple, but I was thinking I would still be one key short. ohh well, not the end of the world, just not ideal. I think my other option is to double up P1 buttons 5, 6, 7 with P3 2, 3, 4, and same for P2 and P4, as the 5, 6, 7 buttons would not be used anyway on any 4 player games. although then it would be up to P1 & P2, to not be an ass and screw up P3 and P4. --- End quote --- I am not fully clear on what you need to do. There are approx 100 different keys available for selection, is this not sufficient? |
| billf1:
My keyboard isn't full-size, so I do not have 100 keys that I can press, I can scrounge up an old keyboard though, not a big deal. Or I should be fine if I use function keys, but several are programmed to other emulators I use and cannot be changed, so I was trying to avoid them, but I guess I could use them for P3 and P4, as they wont be used for other emu's anyway. |
| AndyWarne:
I was going to suggest using the Windows on-screen keyboard but I tried this and MS seem to have removed all the function and num keypad keys from this. But there are probably other third-party on-screen keyboards out there which have all keys available. |
| Navigation |
| Message Index |
| Previous page |