Main > Main Forum
Installing J-pac controller
Pages: (1/1)
jkimrey:
Hi.
After several years after purchasing the J-pac JAMMA board, I am finally trying to get it hooked up to my arcade.
Of course, after so long a delay, I *have* to be missing something. ;)
In this case, it appears to be the PS/2 cable that goes from the computer to the board (I assume it came with one of these, although I don't specifically remember it).
Does anyone know if it is possible to find a replacement cable online? Would I just need a PS/2 cable with male ends on both sides?
Thanks!
AndyWarne:
--- Quote from: jkimrey on April 20, 2014, 07:18:31 am ---Hi.
After several years after purchasing the i-pac JAMMA board, I am finally trying to get it hooked up to my arcade.
Of course, after so long a delay, I *have* to be missing something. ;)
In this case, it appears to be the PS/2 cable that goes from the computer to the board (I assume it came with one of these, although I don't specifically remember it).
Does anyone know if it is possible to find a replacement cable online? Would I just need a PS/2 cable with male ends on both sides?
Thanks!
--- End quote ---
Several years
The cable would either have been a male-male PS/2 cable or a DIN to USB cable depending on what you ordered. We can supply the cables and send by mail to minimise shipping. Drop me an email on andy@ultimarc.com
jkimrey:
Email sent Andy.
I also updated the thread to reflect it is a J-Pac, NOT an I-pac.
Thanks
Caparo8bit:
Several years
The cable would either have been a male-male PS/2 cable or a DIN to USB cable depending on what you ordered. We can supply the cables and send by mail to minimise shipping. Drop me an email on andy@ultimarc.com
[/quote] :applaud: thats what i call excelent C. Service.
Pages: (1/1)