| Main > Main Forum |
| Installing J-pac controller |
| (1/1) |
| jkimrey:
Hi. After several years after purchasing the J-pac JAMMA board, I am finally trying to get it hooked up to my arcade. Of course, after so long a delay, I *have* to be missing something. ;) In this case, it appears to be the PS/2 cable that goes from the computer to the board (I assume it came with one of these, although I don't specifically remember it). Does anyone know if it is possible to find a replacement cable online? Would I just need a PS/2 cable with male ends on both sides? Thanks! |
| AndyWarne:
--- Quote from: jkimrey on April 20, 2014, 07:18:31 am ---Hi. After several years after purchasing the i-pac JAMMA board, I am finally trying to get it hooked up to my arcade. Of course, after so long a delay, I *have* to be missing something. ;) In this case, it appears to be the PS/2 cable that goes from the computer to the board (I assume it came with one of these, although I don't specifically remember it). Does anyone know if it is possible to find a replacement cable online? Would I just need a PS/2 cable with male ends on both sides? Thanks! --- End quote --- Several years The cable would either have been a male-male PS/2 cable or a DIN to USB cable depending on what you ordered. We can supply the cables and send by mail to minimise shipping. Drop me an email on andy@ultimarc.com |
| jkimrey:
Email sent Andy. I also updated the thread to reflect it is a J-Pac, NOT an I-pac. Thanks |
| Caparo8bit:
Several years The cable would either have been a male-male PS/2 cable or a DIN to USB cable depending on what you ordered. We can supply the cables and send by mail to minimise shipping. Drop me an email on andy@ultimarc.com [/quote] :applaud: thats what i call excelent C. Service. |
| Navigation |
| Message Index |