| Main > Main Forum |
| Coin Door Wiring Question |
| (1/2) > >> |
| robfg67:
Hello, First let me say that yes I did do a search and have read the Real Bob Roberts wiring page. I'm hoping that this will be an easy one for those who have done this before... I have a standard arcade coin door and I want to wire a JAMMA wiring harness so the lights, coins, and meter functions. I understand the 12v and ground, but have a couple of other questions Here is a picture of the back of the coin door: Look at the 5-wire plug in the top right of picture. The top 2 wires are run to the meter plug below. The black is the ground. The bottom wire is power. What is that gray wire for? Here is a closeup of that top plug: Also, volume, test, and service controls are mounted just inside the coin door: Do I need to attach any wires from the JAMMA harness here and if so, which? Thanks, Rob |
| robfg67:
I thought I asked a pretty straight forward question and supplied pictures to make it easy. I guess this forum/hobby doesn't support newbies. Thanks all 62 viewers for nothing! |
| ed12:
if u ever want answers that is not the way to reply...!!!! if the board is mame? then not really if the board is like pacman/galga >then that is the volume contorl<,and >test switch< some times the volume control is not required,the devil is in the details u answered your own question >Also, volume, test, and service controls are mounted just inside the coin door:< ed |
| Louis Tully:
. |
| Thenasty:
Wires are: 1 GND 1 Coin Counter 1 Bulbs/Lights 1 Player 1 Coin in 1 Player 2 Coin in There the five wires. Just trace it and you're set. |
| Navigation |
| Message Index |
| Next page |