| Main > Main Forum |
| Power inlet options |
| << < (2/4) > >> |
| BadMouth:
--- Quote from: fantoboy on March 12, 2014, 09:07:41 am ---You used this in conjunction with a separate inlet mounted on the outside? --- End quote --- Yup. The center piece in the back is punched out and it sat opposite of the inlet. My back panel is only 1/2" thick, so it was pretty tight. It needs to be offset enough that the tabs on the inlet aren't close to the screws on the outlet. |
| fantoboy:
I'd love something like this that was mountable: http://www.amazon.com/SF-Cable-prong-Adapter-60320-C14/dp/B004OC579E/ref=pd_sbs_lg_1 |
| PL1:
--- Quote from: EMDB on March 12, 2014, 09:09:56 am ---You should cut of the plug of the smart strip and solder the cable to the back of the socket outlet --- End quote --- Check the connections on the back of the outlet, they usually use .250" QDs. Either way, make sure you have solid electrical and mechanical connections. --- Quote from: EMDB on March 12, 2014, 09:09:56 am ---@PL1: This should be covered in the new FAQ as it is asked a lot lately... --- End quote --- Good suggestion. It was already wiki'd here on the Wiring page. Added a link to that part of the Wiring page from the FAQ here. ;D Scott |
| MTPPC:
I like these from amazon - search IEC |
| SavannahLion:
Just to point out something that may be missed. Actually, it was brought up by the 13 year old who has an amazing way of not understanding anything I tell her. Pink sky and green seas I guess :dunno. But I digress. It should be noted that the 1st photo in the 1st post is intended to be a socket that receives from the wall. In other words, it receives power. Whereas the 2nd photo is a wall socket that sources power. The two are not interchangeable if one is talking about the "same side" of the cabinet wall. I take the 13 yr olds confusion as something I should take seriously. because I can imagine some dip :censored: reading half of this thread then deciding that reversing the energy direction of one or the other is a good idea. You don't want to be this stupid |
| Navigation |
| Message Index |
| Next page |
| Previous page |