Main > Main Forum
Best Place to get 22 gauge wire and disconnects?
(1/4) > >>
Cobolisdead:
So, I am ready to start building my control panel, but I need to get the wiring to connect it all. Anyone know a good place to get all the 22 gauge wiring in various colors along with the disconnects to hook them up to the microswitches?
Nephasth:
Wire (in bulk)... Empire Wire Supply.
Disconnects... Paradise Arcade Shop.
Ken Layton:
All kinds of wire colors:

http://www.allelectronics.com/make-a-store/category/825470/wire/cable/stranded-hook-up-wire-25-roll/1.html

Crimp terminals:

http://www.allelectronics.com/make-a-store/category/196/crimp-terminals/1.html

You'll probably use the red 3/16" quick disconnect terminals on the switches.
mgb:
Alternatively, You can buy an econo jamma harness with the disconnects already installed and the wires are multiple colors.
cut off the jamma connector end and use as needed.
Cobolisdead:

--- Quote from: Ken Layton on March 10, 2014, 07:30:40 pm ---All kinds of wire colors:

http://www.allelectronics.com/make-a-store/category/825470/wire/cable/stranded-hook-up-wire-25-roll/1.html

Crimp terminals:

http://www.allelectronics.com/make-a-store/category/196/crimp-terminals/1.html

You'll probably use the red 3/16" quick disconnect terminals on the switches.

--- End quote ---

Hmmn, the 3/16 ones are unshielded though. Will that make a difference?
Navigation
Message Index
Next page

Go to full version