Main > Main Forum

Show us your OLD cabs that are still going strong....

Pages: << < (4/5) > >>

Brian74:


--- Quote from: Minwah on March 11, 2014, 11:22:46 am ---Started this in 2003 (or 2004?). Seem to remember putting the sideart on in 2007 and that was it basically finished. However it took me until late 2012 to finish the artwork for 3 out of the 4 control panels...

This pic is fairly recent but I have since painted the speaker panel with satin paint (instead of gloss), and replaced the start buttons with black ones. The coin door is gloss which I would like to sort out at some point.

Apart from replacing a microswitch on one of the joysticks the machine hasn't missed a beat!  :)

--- End quote ---

Road Blaster Cab?

404:


--- Quote from: Minwah on March 11, 2014, 11:22:46 am ---Started this in 2003 (or 2004?). Seem to remember putting the sideart on in 2007 and that was it basically finished. However it took me until late 2012 to finish the artwork for 3 out of the 4 control panels...

This pic is fairly recent but I have since painted the speaker panel with satin paint (instead of gloss), and replaced the start buttons with black ones. The coin door is gloss which I would like to sort out at some point.

Apart from replacing a microswitch on one of the joysticks the machine hasn't missed a beat!  :)

--- End quote ---

What front end is it running? Hyperspin?



ed12:

well then for the pure smack down of it
i still have a refurbed ms packman in feild making $$$
un-real as it sound's...---steaming pile of meadow muffin--- down cocktail orignal..
new  top-glass and a r-paint on the coin door,
plus new p/s took out the old nasty linear..
2.5 years and running

ed



Minwah:


--- Quote from: Brian74 on March 11, 2014, 10:56:25 pm ---Road Blaster Cab?

--- End quote ---

Scratch built but loosely based on the RoadBlasters (System 1) cabinet.

Minwah:


--- Quote from: 404 on March 11, 2014, 11:17:02 pm ---What front end is it running? Hyperspin?

--- End quote ---

Hah you guessed it! ;)

Pages: << < (4/5) > >>

Go to full version