| Main > Main Forum |
| I hope I'm in the right place! |
| << < (5/7) > >> |
| PwnFx:
--- Quote from: EMDB on February 28, 2014, 05:29:35 pm --- --- Quote from: PwnFx on February 28, 2014, 05:23:35 pm ---Which of the KADE devices should I actually be looking at when thinking of purchasing? They have a few different products ranging from $15-$55. --- End quote --- You could also use an I-PAC2. 32 inputs + volume control + power control , shifted functions and easy programmable (default MAME keys are pre-programmed) for $39: --- End quote --- That's what I was thinking, it seems the KADE solution is going to require the $55 purchase. No matter the route I go for the encoder, which route should I go for the buttons/joysticks? I've been continuing to look around ebay for the cheapest "all-in-one" setup so I don't have to order pieces individually, and this seems to be a fair option: http://www.ebay.com/itm/NEW-Arcade-JAMMA-60-in-1-Kit-w-2-Joysticks-4-8-way-16-Push-Buttons-MAME-/251336973880?pt=LH_DefaultDomain_0&hash=item3a84d9de38 But then again, I really have no clue what I'm looking for here. Thank you guys. |
| PL1:
--- Quote from: PwnFx on February 28, 2014, 05:23:35 pm ---Which of the KADE devices should I actually be looking at when thinking of purchasing? They have a few different products ranging from $15-$55. --- End quote --- The $29 miniArcade is probably your best option, but if you're handy with a soldering iron, the $22 complete kit is an option. The Minimus AVR is the same AVR controller, but you don't get the screw terminals. Scott |
| PL1:
--- Quote from: PwnFx on February 28, 2014, 05:32:07 pm ---I've been continuing to look around ebay for the cheapest "all-in-one" setup so I don't have to order pieces individually, and this seems to be a fair option: http://www.ebay.com/itm/NEW-Arcade-JAMMA-60-in-1-Kit-w-2-Joysticks-4-8-way-16-Push-Buttons-MAME-/251336973880?pt=LH_DefaultDomain_0&hash=item3a84d9de38 --- End quote --- You probably will have to order from more than one vendor, the trick is to find the most efficient combination of vendors to get the parts you want. ;D That ebay link has a Jamma harness so you'll need to cut it up and add some more QDs for your setup. Scott |
| PwnFx:
--- Quote from: PL1 on February 28, 2014, 06:03:24 pm --- --- Quote from: PwnFx on February 28, 2014, 05:32:07 pm ---I've been continuing to look around ebay for the cheapest "all-in-one" setup so I don't have to order pieces individually, and this seems to be a fair option: http://www.ebay.com/itm/NEW-Arcade-JAMMA-60-in-1-Kit-w-2-Joysticks-4-8-way-16-Push-Buttons-MAME-/251336973880?pt=LH_DefaultDomain_0&hash=item3a84d9de38 --- End quote --- You probably will have to order from more than one vendor, the trick is to find the most efficient combination of vendors to get the parts you want. ;D That ebay link has a Jamma harness so you'll need to cut it up and add some more QDs for your setup. Scott --- End quote --- Oh boy... This is starting to get discouraging. Lol. |
| PL1:
There are a lot of options. :lol If you want to narrow the number of vendors while keeping a good selection of quality products, GGG, Ultimarc and Paradise Arcade offer just about anything you want/need. Scott |
| Navigation |
| Message Index |
| Next page |
| Previous page |