| Main > Consoles |
| Genesis/Mega Drive to monitor? |
| << < (3/3) |
| rowie4life:
I not got one yet (arcade machine) so i'm not 100% sure what i |
| Dave_K.:
--- Quote from: rowie4life on December 09, 2003, 11:09:47 pm ---So I guessed that I needed one (Fingerboard) now I think I don't so what do I need for my Mega Drive 2 (Genesis 2) to a arcade monitor? --- End quote --- Yeah, you don't need to worry about the jamma fingerboard. If you are hooking up your genisis to a normal arcade monitor (standard res), then just hookup the red/green/blue/ground and sync lines to the monitor inputs. The sync line will go to the horizontal input. You may need to put 220uf capacitors in line with the red/green/blue lines to the monitor to brighten up the picture (try first without it and see). |
| rowie4life:
id just though id say thanx if i cant find a arcade machine would this monitor work alright seens how its 15 khz and not 15.7 khz (or whaever the pal version is) |
| Dave_K.:
Yes that monitor will work. I have a hanatrex 25" polo in my arcade cabinet. Most people round off the sync rate and just say 15khz, but its the same thing. |
| Navigation |
| Message Index |
| Previous page |