| Main > Main Forum |
| EMS TopGun 3 any good ? |
| << < (2/2) |
| AndyWarne:
--- Quote from: DeLuSioNal29 on February 23, 2014, 07:49:31 pm ---That video is grossly incorrect. The reality is: Once you move from the original calibration point the laser naturally seems off. --- End quote --- Thats correct, the instructions for the Aimtrak clearly state that the gun will lose accuracy if the player moves to a different firing height unless re-calibrated. The video actually makes the problem appear worse because the gun constantly re-learns its location and applies correction, but in order to prevent jumping, the correction is remembered and only applied when the gun is pointed off-screen. In the video he moves around the room while still aiming at the screen so the gun does not have an opportunity to apply any correction. |
| pbj:
As always, taping a wide angle lens to the front of the Top Gun improves accuracy and reduces needed distance. :cheers: |
| s8n187:
--- Quote from: AndyWarne on February 25, 2014, 05:24:31 am --- --- Quote from: DeLuSioNal29 on February 23, 2014, 07:49:31 pm ---That video is grossly incorrect. The reality is: Once you move from the original calibration point the laser naturally seems off. --- End quote --- Thats correct, the instructions for the Aimtrak clearly state that the gun will lose accuracy if the player moves to a different firing height unless re-calibrated. The video actually makes the problem appear worse because the gun constantly re-learns its location and applies correction, but in order to prevent jumping, the correction is remembered and only applied when the gun is pointed off-screen. In the video he moves around the room while still aiming at the screen so the gun does not have an opportunity to apply any correction. --- End quote --- roger that Andy , i never thought i would get the opportunity to speak with you i own 2 J-Pac's and plan 4 more i also have a ArcadeVGA2 and plan to buy the new 5000 model which really looks fantastic btw................. |
| Ginsu Victim:
--- Quote from: s8n187 on February 25, 2014, 11:50:38 am ---roger that Andy , i never thought i would get the opportunity to speak with you --- End quote --- Really? He's here all the time addressing questions about his products. He's a good guy. |
| billf1:
--- Quote from: Ginsu Victim on February 25, 2014, 11:52:41 am ---Really? He's here all the time addressing questions about his products. He's a good guy. --- End quote --- Yup, agreed, I am new to CP building, and I have had a few problems, Andy has answer all questions I have had for him very quickly. Currently I am in a CP layout test, while I finalize plans for my full cab, and I will absolutely order remaining parts from Andy, service is excellent, quality is very good (granted I don't have a lot to compare to, but I am pleased with everything - well except my button layout, but that isn't on Andy). Bill |
| Navigation |
| Message Index |
| Previous page |