| Main > Main Forum |
| Atari yoke questions |
| << < (4/4) |
| jdbailey1206:
--- Quote from: PL1 on February 23, 2014, 11:26:39 am ---If you're spending that much for a 320 degree pot, why not get this one from ArcadeFixIt? No filing required. :cheers: Scott --- End quote --- +1 for Arcadefixit. |
| cj138:
Hey guys, thanks for all the advice. I picked up a new pot from arcadefixit and installed it. I also built a mount and wired the triggers and pots to my APAC. For some reason the cursor keeps jumping around and I cannot calibrate the yoke. Very frustrating. I am very new to this and apologize in advance if I am making stupid mistakes. I daisy chained the grounds from the triggers and the pots together, I also left two connectors disconnected so I can add buttons once the panel is closer to complete. Might this explain the unsteady calibration? I will draw a wiring diagram or take pictures if it will help. :banghead: Thanks much, Cj |
| cj138:
Good Lord, I am sorry folks. My soldering skills are a joke. I reexamined and saw a loose wire. Nothing to see here. Please move along. |
| Navigation |
| Message Index |
| Previous page |