Main > Main Forum
cheapy 'Zero Delay' USB encoder
melvinbates:
Good luck with the relay. Looking at a few datasheets on relays I have, the reaction time of a relay is generally under 10ms. So any one of the pulse lengths should be able to get it to fire and hold it long enough for the ZD to notice it.
InfantSorrow:
--- Quote from: melvinbates on February 25, 2014, 11:27:03 am ---Good luck with the relay. Looking at a few datasheets on relays I have, the reaction time of a relay is generally under 10ms. So any one of the pulse lengths should be able to get it to fire and hold it long enough for the ZD to notice it.
--- End quote ---
Ok guys. Home now.
Putting on my kiss costume coz im ready to rock & roll lol
So.. before I connect everything up let me get the wiring down.
- Ground wires (usb encoder + coin mech) to be joined to COM on the relay
- Coin mech pulse wire to NO on the relay
- usb signal pin (red wire?) to any coil?
Thanks again
The infant
pbj:
No.
InfantSorrow:
--- Quote from: pbj on February 25, 2014, 12:36:39 pm ---No.
--- End quote ---
well throw me a freakin' bone here peabody
pbj:
Do your coin mech wires to Coil 1 and 2.
ZD encoder wires to COM and NO.