| Main > Main Forum |
| Trackball alignment |
| (1/1) |
| 16bitcatholic:
I haven't been able to find this question answered online, so I thought I'd seek wisdom here. I have a used 60-in-1 trackball (photo at http://www.austinamusements.com.au/other-spare-parts/trackball/60-in-1-trackball-3-trackball/prod_209.html) that I'm trying to fit in my cab. Does it matter what direction the trackball alignment is? I have no idea which direction it is supposed to face. Am I supposed to mount it the same way it shown in the photo, flipped around, etc.? Apologies if this question has already been answered. Thanks! |
| PL1:
IIRC, you can look at the data wires. Blue and Purple -- data pair for X axis (turns the roller perpindicular to the monitor) Green and Yellow -- data pair for Y axis (turns the roller parallel to the monitor) Scott |
| 16bitcatholic:
Thank you. After further thought, I'm just going to have one panel on my cocktail be a trackball only. I wanted to fit two buttons, a trackball and joystick on one panel, but that seems like it would be too crowded. |
| Navigation |
| Message Index |