| Main > Main Forum |
| Terminator 2 gun to mame (diagrams using an A-pac and solution for the Recoil) |
| (1/1) |
| Cheesy59:
Hello friends, I've just bought a Terminator2 gun I try to hook up it to A-Pac to run mame using a A-pac. No problem with the buttons, I will do as mentioned here: But I'm wander how to plug the solenoid considering the original wiring: I find an old post with a diagrams but it's for a force feedback motor I know a member called retrorepair succeed to make it with a Revolution X cab but I don't know how he did it Thanks for your Reading and sorry fr my English I'm french :P |
| BadMouth:
You'll need MAMEHooker to translate the output signals from MAME to an output device. http://dragonking.arcadecontrols.com/static.php?page=aboutmamehooker (see links to tutorials on right side of page) For an output device, you can use a Pac-Drive from Ultimarc or LED Wiz from Groovy Game Gear. There are also ways to use the pins on a parallel port, but that can be difficult to accomplish with newer 64 bit operating systems. The output device will need to trigger a transistor or solid state relay. On its own, the output device cannot handle the current or voltage required to trigger the solenoid. |
| Cheesy59:
Thanks you for your reply BadMouth Damn so it won't be so easy :embarassed: And my Ultimarc order wich was sent this morning... :banghead: Nevermind, My original plan was building an alternative panel with this T2 gun to my cab in order to do not damage or denature it (In fact I own a full working Revolution X cab) Do you thin I can cleanly use the cab wiring to get the solenoid working? |
| Navigation |
| Message Index |