Main > Main Forum

Ultimarc Arcade VGA 3000 output to 2 monitors?

Pages: << < (2/2)

SORHP:



--- Quote from: paigeoliver on February 10, 2014, 12:14:15 pm ---Consider swapping out that top Sanyo for a VGA monitor or an LCD. I am assuming you are just using it for a menu/extra stuff like Playchoice does then it won't really matter.

Also, it is totally your machine, but most people don't rip into $900 games to do their mame projects.

--- End quote ---

Thank you for the suggestion ;)

It shouldn't be this hard, I'm thinking I just need to use XP, the bottom monitor is the one I should be pulling, but the goal is not to pull anything... I completely restored this machine from the ground up, I repaired the board over the course of a month alone, as it stands, this machine converts to original in under 2 minutes with monitor adjustment ;)

I kind of hope with the original boards and and monitors and control panel, that it's worth much more than 900;$)

apfelanni:

some time ago i was in need of a cheap 15 k capable gc with dual analog output . i bought a radeon x600 with dms 59  plug + dm > double 15 pin sub d cable . installed win  xp and crt emudriver and it worked like a charm .


SORHP:

I'm going to have to remember that apfelanni! Thank you , as it stands, today I installed xp, arcadevga 3000, and used a video convertor for the top monitor, everything is working well, but it took most of the day, maybe someday down the road I'll be a little more brave and go the route you went;)

SORHP:


--- Quote from: apfelanni on February 15, 2014, 04:37:24 pm ---some time ago i was in need of a cheap 15 k capable gc with dual analog output . i bought a radeon x600 with dms 59  plug + dm > double 15 pin sub d cable . installed win  xp and crt emudriver and it worked like a charm .

--- End quote ---
Can you post a few links maybe?? Especially the driver you used?

apfelanni:

graphiccard like this one :

http://www.ebay.de/itm/109-A62931-OEM-Dell-ATI-Radeon-X600-128MB-PCI-e-/231158344357?pt=UK_Computing_Computer_Components_Graphics_Video_TV_Cards_TW&hash=item35d21c6aa5

low profile or fullsize , dvi-dvi , dvi-analog or analog-analog breakout depending on what u need .

usually 10-20 bucks , best incl. the y-cable . 

sofware : crt emudriver :

http://mame.3feetunder.com/windows-ati-crt-emudriver/

works with groovymame or any other mame version .




Pages: << < (2/2)

Go to full version