| Main > Main Forum |
| 2014 March of Dimes Arcade/Pinball charity prize raffle |
| << < (4/7) > >> |
| Bloinkxp:
Donated! And awesome thing you are doing!! |
| lilshawn:
I'm in. let's kill that goal this year! :applaud: |
| herbertsmart:
New Prizes. . . HobbyRoms is providing programming of any Prom or Eprom for most pinball and video games. Up to 6 chips (max size eprom is 8Mb [27c801] ), and free shipping! A $60 retail value. www.hobbyroms.com Inferno Lab has donated 4 prizes of assorted pinball parts: A: "Addams Family" pinball package 1x backbox backglass retainer lock (from Addams Family), used & rusty but works, with 2 keys. 1x entire under-playfield flipper mech from Addams Family top right flipper, Used, Not pretty, but appears to be complete & should have some good usable parts on it (and many that should be junked). 1x entire under-playfield flipper mech from Addams Family bottom right flipper, Used, Not pretty, but appears to be complete & should have some good usable parts on it (and many that should be junked). 2x under-playfield flipper mech from Addams Family bottom flippers. Only the parts replaced in a rebuild kit (doesn't include base & a couple of other parts). Used, Not pretty, but should have some good usable parts on it (and many that should be junked). 1x set of Addams Family slingshot plastics. Used & warped & scratched, but they're intact. 3x Williams "W" yellow flipper bat. All used, all intact, OK condition. 1x bright red flipper rubber. Looks new. 1x black flipper rubber. New. 1x assembly of 4 momentary switches & bracket from Addams Family coin door. Suspected bad. Maybe good parts. 1x opto(?). Small PCB w/ white housing & LED emitter or collector. Used/new? 1x used Williams white AE-27-1200 coil w/ used sleeve, working? 4x leg leveler, used, rusty, intact; 2 have nuts 12 x leg bolt, rusty, used Set of ROM chips: 1x U6 aftermarket TAFG program ROM (known working), 1x U18 factory TAF sound ROM (known working), U15 & 1x U18 aftermarket TAFG sound ROMs (couldn't get to work--assumed bad) B: "Meteor" pinball package 1x set of Meteor used parts, all with yellowing/wear: 2x "Advance 1 When Lit" passive bumper cap, 1x red star pop bumper cap, 1x white "beehive" shooter rod housing. 1x Stern TA-100 Rev B Rectifier PCB. Broken but clean. R1 resistor broken. Maybe other problems. Should have other good parts or be repairable--not trashed. From a Meteor. 1x Bally white flipper bat (from Meteor). Used but intact & clean. Light use--believed to be installed by previous owner, but I took it out & put in black bats. 2x purple flipper rubber. Light use. 1x yellow flipper rubber. Used, some grunge. 1x mystery plunger/lever/connector/compression spring, from Meteor--ball trough kickout?, used C: "Medusa" pinball package 2x Medusa/Firepower II Bally clear red flipper bats/shaft. Used, much set screw wear on shafts. 1x rare green Medusa transparent green round stationary target assembly, used but pretty clean 1x rare red Medusa transparent red square stationary target--target paddle only, broken 1x yellow square deep stationary target assembly, used, but pretty clean 1x green round stationary target assembly, underside mount, new 1x transparent red rectangular stationary target--just the red plastic target part, with hole, I think it's new 1x a small mish-mash of new/used stationary target parts D: "Misc" pinball package 8x "normal" pinball ball, slightly used, good condition 2x 077-5101-00 Bayonet Base 2-Lead Sockets With Short Mounting Bracket For #89 Bulbs. Brand new, unused extras, bought from Pinball Life. 2x gray vinyl switch cover, new. Looks like Marco P/N 20-9646-G 1x used Williams yellow AE-23-800 coil w/ used sleeve, working? 1x used Williams German orange FL 11629-TYP 2 ELEKTRONIC coil w/ 2 used diodes & used sleeve, worked when pulled from machine 1x rectangular body of orange Push To Reject mechanism, no front panel that traps artwork, looks new 1x transparent red rollover lane cover, looks new, I think I got it for RFM but didn't need it 2x black rubber shooter rod tip, new 5x white rubber cap post nut, lightly used 9x black rubber cap post nut, new 20x black o-ring rubber assortment, ranging from 1/4" ID to 5/8 ID, all new 1x used black mushroom head shooter rod, some wear www.infernolab.com ArcadeFixIt was donated two prizes. 1 Pac Man theme goodie pack ($75 retail value) 1 Space Invaders goodie pack ($75 retail value) Check out www.arcadefixit.com for tons of NOS parts More Prizes to be announced next week! Please donate to get entered to win at: http://www.marchforbabies.org/deanryanayer |
| lilshawn:
Just donated again. I want to see this bar filled up! |
| herbertsmart:
Thanks for the recent donations! Here are even more prizes that will be available in the raffle: TNT Amusements has donated a lot of 5 working power supplies. There are five clean working 100% power supplies to cover all types of arcade games. All of them have at least 3 common voltages and some as many as 5. These will fit Golden Tee Golf, Merit Megatouch, common older video games that use a screw terminal power supply, and newer machines that use hard drives. www.tntamusements.com Ground Kontrol Classic Arcade has offered up 3 prize packs that include a $20 gift certificate, Ground Kontrol t-shirt, can koozy, pins, and stickers. www.groundkontrol.com/ Dream Authentics has contributed a Tornado Spinner The Tornado Spinner is the world’s first ultra smooth gaming spinner. Totally custom made, the tornado spinner is primarily used for arcade games like Tempest and can even be used as a steering wheel for driving games. It has an extremely smooth and effortless spin that is perfect for emulation and PC gaming. The Tornado spinner comes with all cables and adaptors necessary for both USB and PS2 port connections. We also offer a TTL board version that will connect to your Opti-Pac or Mini-Pac. www.dreamauthentics.com/ To be entered into the raffle donate at: http://www.marchforbabies.org/deanryanayer |
| Navigation |
| Message Index |
| Next page |
| Previous page |