Main > Main Forum

what the hell do I do with this (rude answers on a postcard)

Pages: << < (4/4)

stigzler:

Thanks chaps + brilliant Franco!

the c120 has a 10 pin out - the credit board a 15 pin in - hence the confusion!



Barry Barcrest:

Can you not wire it directly to an ipac or are you not using this in a PC. If you are wiring up to an ipac or similar each accepted coin just sends a pulse that you can set up as a key press. This is how I have done it in the past on my jukebox. I used a chopped Hard Drive Ribbon cable to connect the coin mech to the keyboard encoder (Ipac or similar).

stigzler:

Thanks barry. Thats how I have my coin mech wired atm - direct to the minipac. But am looking to use the credit board to send a number of pulses depending on whivh coin inserted. E.g. 10p sends one pulse, 50p sends 5. Hence the credit board. 

stigzler:

Still stuck on this - any other ideas?

Pages: << < (4/4)

Go to full version