Main > Main Forum
what the hell do I do with this (rude answers on a postcard)
<< < (4/4)
stigzler:
Thanks chaps + brilliant Franco!

the c120 has a 10 pin out - the credit board a 15 pin in - hence the confusion!

Barry Barcrest:
Can you not wire it directly to an ipac or are you not using this in a PC. If you are wiring up to an ipac or similar each accepted coin just sends a pulse that you can set up as a key press. This is how I have done it in the past on my jukebox. I used a chopped Hard Drive Ribbon cable to connect the coin mech to the keyboard encoder (Ipac or similar).
stigzler:
Thanks barry. Thats how I have my coin mech wired atm - direct to the minipac. But am looking to use the credit board to send a number of pulses depending on whivh coin inserted. E.g. 10p sends one pulse, 50p sends 5. Hence the credit board. 
stigzler:
Still stuck on this - any other ideas?
Navigation
Message Index
Previous page

Go to full version