Main > Driving & Racing Cabinets

sega32.c emulaton and output hooking

(1/2) > >>

baritonomarchetto:
I was reading the "old" Howard topic about hooking outputs for driving games in MAME. Noticed that, at some point, he (you Howard if you are reading  ;)) wrote:


--- Quote from: Howard_Casto on April 10, 2010, 12:26:42 pm ---Now there is some bad news....  From what I've read in the driver notes jurassic park, and possibly radmobile and rad rally have had their extended driver boards (for motors and pistons) cludged in to get the driver working.  That means unless someone completes the emulation, I can't hook up the motor/piston outputs for those games.   :'(

--- End quote ---

is the emulation of those drivers still at the point that outputs are unavailable? I saw that they are not hooked up, but would it be possible now to hook them up?

In addition: looks like Outrunners motor vibrator is not hooked up, but lamps actually are. Is that because of the same problem of the cited games?

Howard_Casto:
Outrunners has working FF and it is hooked up (I did it myself) in many of these games you have to change the cabinet mode in the settings, because one style doesn't have outputs, ect....

baritonomarchetto:
That's the Powerdrift case, in example, but i just downloaded the 3 versions of outrunners (world, us, and japan) and none have the vibration output, nore there are dip switches to change the cabinet type ...

May I ask you to doublecheck if something have changed?

Here is the ini i get:


--- Code: ---[General]
MameStart=
MameStop=
StateChange=
OnRotate=
OnPause=
[KeyStates]
RefreshTime=
[Output]
MA_Check_Point_lamp=
MA_Race_Leader_lamp=
MA_Steering_Wheel_lamp=
MA_DJ_Music_lamp=
MA_<<_>>_lamp=
MB_Check_Point_lamp=
MB_Race_Leader_lamp=
MB_Steering_Wheel_lamp=
MB_DJ_Music_lamp=
MB_<<_>>_lamp=

--- End code ---

I can see tons of lamps, but not a vibrator motor control ...

Howard_Casto:
It's "steering wheel lamp".  That's a typo, and I've since submitted a patch YEARS ago.  I don't have a clue why it wasn't fixed.

But for the record, yes, it does have a dip section... press F2 to go into the soft dip.

baritonomarchetto:
Thank you dude. I will correct the typo (for sure in racermame).
I made some toying yesterday with that line, but i had no success. I wll check again, but do you eventually remember the cabinet/dip combination to have it running? I have segaorun.c games and system y oerfectly rumbling, but no success with sega32
thanks

EDIT: made some testing this morning and, YES, outrunners is still hooked up (i made a stupid error by defining the vibrator motor for player 2 (MB). great work (even if you have no more love for it  :'(... I am just kidding  :lol)

Navigation

[0] Message Index

[#] Next page