Arcade Collecting > Merit/JVL Touchscreen

Megatouch XL - motherboard ??

<< < (11/12) > >>

ed12:
pm me your e-me
i have dumbed both of them

from as far as i went
it carrys >u12< what we have been chatting about before they moved it to hd
and the flash carrys the dang hash
1=29f040 full size dip
1=27c801 full size dip

my unit is a willeman usb drive jobbie

a tad of a high jack here
u will need a good couple of hex converters to see it in plain .txt
which will been seen on your right hand side
of the coloum
the top 2 lines carry your date code
u will scroll down to >name- merit /date<
then it is the process code
at the bottom make sure,AND I SAY MAKE SURE,YOUR HEXCSUM MATCHS

ed

mahkeymike:
ed12, pm sent.

cush:
Wow didn't realise this post was so long ago  :o
Anyhow decided it's time to have another go at this or rip out the guts of it and convert to full multi game cab.

ed if you remember our pm chats you seemed to think you might have a solution, granted that was a while ago.
Still gets boot disk failure.
Have had a lappy connected to screen and touch system all works although I get 3 desktops so must be a resolution thing...do these only support 640 ?

ed12:
hi
i would need to go back on my notes to even remeber this thread..
when i did the dump's i was hot into them, have completed what i will be doing for now and moved on.
i think i still have the dump's here if required.
but failing "boot-disk-faliure" is normaly the hard drive has gone south.
or your "bios" is wackey
so with a test drive with o/s installed,i use xp for this,if it boot's ?,even with error's
u can 80% be sure the harddrive is south

ed

cush:
Thanks for reply, this one had no hard drive or cd rom.
It did boot an old hard drive with Xp when I tried it last time we played about with it.
I may just use a new pc in it if I can get monitor res sorted, do they only support 640 on these ?

Navigation

[0] Message Index

[#] Next page

[*] Previous page