| Main > Main Forum |
| Two buttons with same function? |
| << < (2/6) > >> |
| pbj:
Yeah, if you've got the inputs to spare, I'd go with JDFan's method. You can set the defaults so that Button 1 and Button 4 both do the same thing, and then tweak as needed for other games. I don't particularly like dead inputs on my control panel, so this is how I've got everything mapped. |
| DaOld Man:
I think the method Malenko suggested would be the simplest. Just parallel the two buttons. If you don't want both buttons enabled at the same time you could use a spdt switch that can switch between the two buttons, enabling the button to use based on the switch position (left hand/right hand). |
| Hoopz:
--- Quote from: JDFan on January 13, 2014, 10:33:32 am ---Yep -- I also do the same with my 2nd joystick and buttons 3-6 on my 1 player bartop using a ZD encoder since I wanted to have dual joysticks for robotron and smash TV but the cheap encoder ($10) had only 16 inputs so by doubling up buttons 3-6 with the 2nd joystick it left enough open inputs for the 6 admin buttons I wanted where 16 would not have been enough for 2 joys ( 8 ), 6 buttons, and 6 admin buttons == 20 inputs but by doubling up the 3-6 buttons with the second joystick it uses 4 inputs for those 8 functions - 4 for the other joystick and 2 for buttons 1 and 2 = 10 leaving 6 inputs for admin buttons ( 1 and 2 player credit and start then a Pause and Escape ) --- End quote --- Dude, that's one amazing sentence! :cheers: |
| JDFan:
--- Quote from: Hoopz on January 13, 2014, 01:50:33 pm ---Dude, that's one amazing sentence! :cheers: --- End quote --- OK so I tend to ramble and didn't figure a post needed to be fully punctuated on an arcade building forum as long as the point got across ! :dunno Would you have preferred : --- Quote ---Yep -- I also do the same with my 2nd joystick and buttons 3-6 on my 1 player bartop. Since I am using a ZD encoder and wanted to have dual joysticks for games like Robotron and Smash TV. The cheap encoder ($10) has only 16 inputs, so required doubling up buttons 3-6 with the 2nd joystick to leave enough open inputs for the 6 admin buttons I wanted. Figure normally for 2 joysticks ( 8 inputs ), 6 player buttons, and 6 admin buttons, I would have needed 20 inputs. Doubling up the 3-6 buttons with the second joystick allowed using only 4 inputs for those 8 functions. Another 4 for the first joystick and 2 for buttons 1 and 2 used 10 inputs, leaving 6 inputs for admin buttons ( 1 and 2 player credit and start, and then a Pause and Escape button ) --- End quote --- |
| Hoopz:
Nope, I seriously enjoyed it. :applaud: |
| Navigation |
| Message Index |
| Next page |
| Previous page |