Arcade Collecting > Merit/JVL Touchscreen

Megatouch announces closure!

<< < (6/16) > >>

mahkeymike:
Will you be getting that forever kit by any chance shawn? Im guessing they will only give them to ML-1 owners. Not sure if you had been sucker'd into buying one.

I would like to take a peak at the software though, even the mobo brand and model/chipset would be nice to know aswell.

pbj:
There will be a licensed app, no doubt.

Nobody touches these things on location anymore.

ed12:
mahkeymike
they are olny offering it reged owners on  line with them..
pbj unless u cannot read it is the end of the line for that s/w
they are pulling the plug and the end of 2014
they will with no doubt regroup and come up with some thing
but ami is done with it,as of 2 years ago
maybe touch tunes will pick it up ?
but once 2014 is over it is open test time
like it is now for legacey products

ed

mahkeymike:

--- Quote from: ed12 on January 12, 2014, 03:14:13 pm ---mahkeymike
they are olny offering it reged owners on  line with them..
pbj unless u cannot read it is the end of the line for that s/w
they are pulling the plug and the end of 2014
they will with no doubt regroup and come up with some thing
but ami is done with it,as of 2 years ago
maybe touch tunes will pick it up ?
but once 2014 is over it is open test time
like it is now for legacey products

ed

--- End quote ---

So this so called "forever kit" is just an online patch? not exactly "forever" if the hard drive goes bye bye. There must be some type of offline software reinstall disc in the event the hard drive goes. It should be no different then the ion software, a key will always be needed, but there has to be a way to get the software onto a new hard drive.

ed12:
u know it almost demands a call to there tech dept to get some clearity
on this matter..reason is they had 1/2 of the s/w in there servers.?
so 1 has to think are they sending me the complete thing or just the s/w to untie me from there server ?
the q's are to many to answer with out  some tech input from merit on this matter..
Now if there is a hard drive?
might be a good idea to do a layer by layer copy of it
ie: track 0 through,so u get a complete over-lay
with or with out the new s/w,if u did not get the kit ? then try to get a layer by layer of 1 that dose have it,along with the 1 u have should do for u to compare,this will answer alot of questions

ed

Navigation

[0] Message Index

[#] Next page

[*] Previous page