Author Topic: Grounds 4 Divorce (Read 12155 times)

Connorsdad · « **on:** December 11, 2013, 11:32:05 am »

My first build is finally complete after 9 loooonng months

Thanks to Griffindodd/Maximus for inspiring me with his awesome Marvel v Capcom: Revolution cab, also to all you talented guys here and over on the HyperSpin forums (especially Djvj) that have helped me along the way.

BadMouth · « **Reply #1 on:** December 11, 2013, 11:37:21 am »

Wow, that is pretty close to the original....and just as clean.

mgb · « **Reply #2 on:** December 11, 2013, 11:50:06 am »

Very nice.
I say for your next project, theme it on
Beat 'em ups and call it Custody Battle

drventure · « **Reply #3 on:** December 11, 2013, 12:09:22 pm »

I had forgotten about this cab. Nicely done!

Pinball, and arcade games all in one.

and in a pretty compact footprint to boot.

jbenesh · « **Reply #4 on:** December 11, 2013, 02:35:07 pm »

Impressive build.

Dawgz Rule · « **Reply #5 on:** December 11, 2013, 07:07:54 pm »

Nice build

Superfrog · « **Reply #6 on:** December 12, 2013, 06:08:56 pm »

Very slick finish

What frontend are you using for the Pinball and arcade games?
I'm testing HyperPin and looks good, but it can't play mame games on it.

Is running HyperSpin ( 2screen setup) the pinball the same as HyperPin or is that just for Desktop tables and HyperPin for cabinet tables?

Connorsdad · « **Reply #7 on:** December 13, 2013, 04:23:49 am »

Quote from: Superfrog on December 12, 2013, 06:08:56 pm

Very slick finish

What frontend are you using for the Pinball and arcade games?
I'm testing HyperPin and looks good, but it can't play mame games on it.

Is running HyperSpin ( 2screen setup) the pinball the same as HyperPin or is that just for Desktop tables and HyperPin for cabinet tables?

I'm using Hyperspin as my frontend and I have Hyperpin launching from inside it (Via PC games wheel)

thatpurplestuff · « **Reply #8 on:** December 13, 2013, 12:08:20 pm »

Very nice looking, and possibly the best name for an arcade cabinet ever. Well done!

thehammer12 · « **Reply #9 on:** December 13, 2013, 12:20:35 pm »

Yeah man that looks sweet

jackiabu · « **Reply #10 on:** December 13, 2013, 01:37:46 pm »

GREAT JOB MEN

is the screen Rotating?

Connorsdad · « **Reply #11 on:** December 13, 2013, 03:21:33 pm »

Quote from: jackiabu on December 13, 2013, 01:37:46 pm

GREAT JOB MEN is the screen Rotating?

Thanks

Yes the lower monitor rotates, I also have dual aimtraks (not in the pics) which are for use with the upper monitor. At the moment the guns are resting on top of the cab when not in use, need to sort a better storage solution.

Superfrog · « **Reply #12 on:** December 14, 2013, 01:52:03 pm »

What's the specs of your pc?

I'm lurking around for my new pinball project...

Thanks

BobA · « **Reply #13 on:** December 14, 2013, 01:57:47 pm »

Very nice build. Be sure to have it considered for a 2013 UCA award.

Connorsdad · « **Reply #14 on:** December 14, 2013, 03:29:03 pm »

Quote from: BobA on December 14, 2013, 01:57:47 pm

Very nice build. Be sure to have it considered for a 2013 UCA award.

Not sure it's good enough to join the elite but sure it'd be fantastic to get recognition for my blood, sweat and tears

How do I nominate my cab?

Connorsdad · « **Reply #15 on:** December 14, 2013, 03:37:01 pm »

Quote from: Superfrog on December 14, 2013, 01:52:03 pm

What's the specs of your pc?

I'm lurking around for my new pinball project...

Thanks

Intel i3-2100 sandybridge
Nvidia GeForce GTX 650
8 gb ram
1tb hdd

I'd recommend a better processor tbh, that seems to be a bottle neck on my setup.

PL1 · « **Reply #16 on:** December 14, 2013, 07:19:09 pm »

Quote from: Connorsdad on December 14, 2013, 03:29:03 pm

How do I nominate my cab?

The 2012 UCA Nomination thread is here for anyone wanting to review last year's rules.

I assume the rules for this year's UCA will be very similar, so start reviewing the builds of 2013 to see which ones deserve recognition.

Scott

Le Chuck · « **Reply #17 on:** December 14, 2013, 07:23:31 pm »

The beauty of the UCA is that you can't nom your own, that aside this is a great homage.

Connorsdad · « **Reply #18 on:** December 14, 2013, 07:41:37 pm »

Quote from: PL1 on December 14, 2013, 07:19:09 pm

Quote from: Connorsdad on December 14, 2013, 03:29:03 pm
How do I nominate my cab?
The 2012 UCA Nomination thread is here for anyone wanting to review last year's rules.

I assume the rules for this year's UCA will be very similar, so start reviewing the builds of 2013 to see which ones deserve recognition.

Scott

Hey PL1

Massive thanks to you, you held my hand and showed me baby steps to get my pinball buttons setup. Extremely greatful, thank you for your saint like patience.

PL1 · « **Reply #19 on:** December 14, 2013, 07:47:50 pm »

Quote from: Le Chuck on December 14, 2013, 07:23:31 pm

you can't nom your own

I was going to say that in my earlier post, but I don't see where the 2012 rules address someone nominating/seconding their own build.

Might be wise to clarify this in the 2013 rules.

Quote from: Connorsdad on December 14, 2013, 07:41:37 pm

Massive thanks to you, you held my hand and showed me baby steps to get my pinball buttons setup. Extremely greatful, thank you for your saint like patience.

Always glad to assist as others have assisted me -- pay it forward.

Scott
EDIT: Found the "can't nom your own" reference in reply #8 of the 2012 thread.

EightBySix · « **Reply #20 on:** December 15, 2013, 04:10:47 pm »

Quote from: Le Chuck on December 14, 2013, 07:23:31 pm

you can't nom your own

I read somewhere that for some gentlemen this is actually possible

Maximus · « **Reply #21 on:** June 11, 2014, 03:52:28 pm »

LOL this is the first time I have seen this, nice job!!! It's my evil twin

Connorsdad · « **Reply #22 on:** June 11, 2014, 04:39:45 pm »

Quote from: Maximus on June 11, 2014, 03:52:28 pm

LOL this is the first time I have seen this, nice job!!! It's my evil twin

I'm absolutely over the moon with it and it's all thanks to you

JCHusky77 · « **Reply #23 on:** June 12, 2014, 10:00:26 am »

Really love the look of this cab! Im in the planning stages of making my own and I really like your set up of being able to do pinball and arcade as well.

What are you using as your monitor on the horizontal? Are the bezels included in the output from the program and you just set them up?

Really awesome job!

yotsuya · « **Reply #24 on:** June 12, 2014, 10:25:38 am »

Did she divorce you yet?

scoodidabop · « **Reply #25 on:** June 12, 2014, 11:21:16 am »

Wow I need to hit these threads up more often. The stuff you guys are doing with multiple screens is amazing.

Fresh. To. Death.

Good job.

taylormadelv · « **Reply #26 on:** March 13, 2015, 05:40:46 pm »

Holy crap moly!

I missed this! Wow! I love the name, brilliant!

Connorsdad · « **Reply #27 on:** March 28, 2015, 05:22:41 am »

Quote from: taylormadelv on March 13, 2015, 05:40:46 pm

Holy crap moly! I missed this! Wow! I love the name, brilliant!

Thanks, yes the name is very appropriate

Chagosan · « **Reply #28 on:** July 02, 2017, 11:48:24 pm »

Best cabinet ever.... Thanks for sharing hope everything else is going well


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news