| Main > Lightguns |
| 2 AimTrak Light Gun setup |
| << < (7/8) > >> |
| Wade007:
With positional gun games you'll need to enter the gun settings in MAME as the STICK X/Y axis controls. Not as the normal Lightgun settings. Also, some of those games require in-game calibration (ie: Terminator 2, Revolution X). All of this should be in the AimTrak manual. Look in the end section where it talks about individual game requirements. |
| jackiabu:
--- Quote from: Wade007 on December 20, 2013, 05:30:56 pm ---With positional gun games you'll need to enter the gun settings in MAME as the ANALOG X/Y axis controls. Not as the normal Lightgun settings. Also, some of those games require in-game calibration (ie: Terminator 2, Revolution X). All of this should be in the AimTrak manual. Look in the end section where it talks about individual game requirements. --- End quote --- from the site : "Positional Games These games originally used a joystick, usually mounted in a gun housing. Although they were originally not lightgun games, they can be played with the AimTrak. Since MAME does not consider these lightgun games, you will need to repeat the above MAME setup procedure for assigning “GUN # X” and “Y” for these specific games. Note that you will be selecting Input (this game) and then selecting the AD Stick X (and Y) Analog inputs, instead of the Lightgun X (and Y) Analog shown above. " Why can not they be more specific :angry: any way here is what i do: i go to in mame to input(genral). then to the AD STICK X (AND Y) here is how its look now: now after i did this seeting, nothing happen. i all so did the calibertion whit F2, but no luck |
| BadMouth:
--- Quote --- Note that you will be selecting Input (this game) --- End quote --- Take a pic of the mappings for only that game. Your pic is of the general settings. Longshot, but something else to check: Is there an ini file for Terminator 2 in the INI folder located in your MAME folder. If so, make sure that the mouse isn't disabled in it. |
| jackiabu:
--- Quote from: BadMouth on December 21, 2013, 10:26:03 am --- --- Quote --- Note that you will be selecting Input (this game) --- End quote --- Take a pic of the mappings for only that game. Your pic is of the general settings. Longshot, but something else to check: Is there an ini file for Terminator 2 in the INI folder located in your MAME folder. If so, make sure that the mouse isn't disabled in it. --- End quote --- BadMouth You are the king :burgerking: thank you. the T2 its now working. I checked my terme2 INI and there is LightGun 0. so I changed it to 1 :applaud: and then i setup in AD Stick X (and Y) the gun whit no problem. But something important and critical I have to say. Many years ago I had connect TRACKBALL. usb. back then calibrate the most games of shots. to the TRACKBALL. Maybe it made me all the mess? :dizzy: all so BIG thanks to the other guys here :applaud: |
| Connorsdad:
jackiabu you may be having the same problem as me here. http://forum.arcadecontrols.com/index.php/topic,136366.0.html |
| Navigation |
| Message Index |
| Next page |
| Previous page |