| Main > Main Forum |
| Sharing Controls Diy Switcher |
| (1/4) > >> |
| Brian74:
So I have googled and searched for a alternative way of sharing the buttons and trackball between my silver strike and bag toss games. I have both pc's mounted in my ssb cab. For the video and audio I plan on using a kvm switch. I tried splicing the ground and 5v between the i/o board and trackball with a dpdt switch. Then wiring the rest of the wires together. But it didn't work. Is there another way beside happs perfect solution or a db9 switch to do this? There is a jamma connector on the bag toss i /o board, but there isn't one on the ssb. Sent from my SGH-M919 using Tapatalk 2 |
| Brian74:
Bump Sent from my SGH-M919 using Tapatalk 2 |
| opt2not:
chopperthedog had a nice thread about using relays for switching between a PC and a JAMMA Multi-williams. I think he said it cost him $50 in parts at the end of the day. http://forum.arcadecontrols.com/index.php/topic,132445.msg1360682.html#msg1360682 I plan on doing something similar for a future project. |
| Brian74:
I seen that, but I have never used relays before. Maybe I will msg him see if he can dumb it up for me so I can understand. Thanks opt! Sent from my SGH-M919 using Tapatalk 2 |
| Fursphere:
A relay is an electronic switch. In one state without power, in another state with power. Closed / Open / Closed are standard. But that post doesn't say anything about what the guy used.. so its kind of worthless. |
| Navigation |
| Message Index |
| Next page |