| Main > Main Forum |
| Setup 12v coin mech. |
| << < (2/2) |
| lilshawn:
these like most coin mechs, switch the coin signal wire to GROUND if a coin is accepted. (IE goes LOW) if you tag of the +12 volts you are feeding the mech with and apply the +12 volts to the one end of a 12 volt bulb and connect the other end of the bulb to the coin line...every time a coin is accepted the light will flash. the mechanism basically is a switch to ground. :dunno |
| Navigation |
| Message Index |
| Previous page |