Main > Main Forum

Betabrite LED Display - Help !

Pages: << < (2/3) > >>

lilshawn:

there is a specific cable you need to interface the betabrite. i have a pinout someplace at home i can post later.

the power supply brick is 7 volts @ 3.25 amps (3250mA) but iv'e heard some people had different voltage ones.



cush:

Well I found the lead for this in bottom of cab in the cash box lol, nice of em to leave it in for me.Only problem is one of 3 wires was off on the seriel end plug, although I did have it working with betamsg software the proper betabrite proggy wont see it, just keep getting "not connected to com1".
I need to check the pins so I can solder it back on properly but at least I know it is working so thanks for the help and info/links. :)

ed12:

female end of db9
2=red
3=green
5=blue
the rest are internal jumpers
if u need the pin outs for them let me know

ed

cush:


--- Quote from: ed12 on November 14, 2013, 01:14:04 pm ---female end of db9
2=red
3=green
5=blue
the rest are internal jumpers
if u need the pin outs for them let me know
--- End quote ---

Big thanks, mine has :
2=white
3=green
5=red - this was off but looked like it had been on 5 and did work in the betamsg software BUT didn't work in betabrite proggy where it keeps giving com1 error.

Ian

ed12:

interesting
if u want i can trace both end's..it is sitting beside me
now mine is out of a pga golf machine.?
i wonder if that ia the dif  :dunno
i will try the s/w and see

ed

Pages: << < (2/3) > >>

Go to full version