| Main > Main Forum |
| Betabrite LED Display - Help ! |
| << < (2/3) > >> |
| lilshawn:
there is a specific cable you need to interface the betabrite. i have a pinout someplace at home i can post later. the power supply brick is 7 volts @ 3.25 amps (3250mA) but iv'e heard some people had different voltage ones. |
| cush:
Well I found the lead for this in bottom of cab in the cash box lol, nice of em to leave it in for me.Only problem is one of 3 wires was off on the seriel end plug, although I did have it working with betamsg software the proper betabrite proggy wont see it, just keep getting "not connected to com1". I need to check the pins so I can solder it back on properly but at least I know it is working so thanks for the help and info/links. :) |
| ed12:
female end of db9 2=red 3=green 5=blue the rest are internal jumpers if u need the pin outs for them let me know ed |
| cush:
--- Quote from: ed12 on November 14, 2013, 01:14:04 pm ---female end of db9 2=red 3=green 5=blue the rest are internal jumpers if u need the pin outs for them let me know --- End quote --- Big thanks, mine has : 2=white 3=green 5=red - this was off but looked like it had been on 5 and did work in the betamsg software BUT didn't work in betabrite proggy where it keeps giving com1 error. Ian |
| ed12:
interesting if u want i can trace both end's..it is sitting beside me now mine is out of a pga golf machine.? i wonder if that ia the dif :dunno i will try the s/w and see ed |
| Navigation |
| Message Index |
| Next page |
| Previous page |