Arcade Collecting > Pinball

Parts for M200 MPU board

<< < (2/6) > >>

ed12:
pbj
yup
correct

ed

pbj:
And here's your repair kit:

http://www.greatplainselectronics.com/proddetail.asp?prod=BALLY35-BA-KIT

And here's my advice - brace yourself financially for buying a replacement. 

 :cheers:

Sarver Systems:
That's the one I bought. Bought 2 of em since there is another pin in the collection that uses the same board. I'll be repairing it as well I assume.

I'll also be performing a remote battery mod on the board as well.

ed12:
i trust u ordered the ram also ?
if not?. why u are doing is for not..
also.there is a timming chip >nla< that goes to crap
why u did not just get  unversial replacment micro boards ? is beside me...??
u will have more time and work into repairing them 20+ year old boards then the replacements are worth..i mean do the math
your time is worth xxxx or x the replacement is worth xx

ed

smartbomb2084:
Here is an IPDB link to the METEOR manual with a schematic for the MPU 200 albeit a little hard to read.

You guys cave in too easy... These Classic STERN and BALLY MPUs are the easiest to fix in all of pinball..

You don't learn much about board repair caving into the aftermarket crowd.

Glad to see you want to give it a shot and hopefully learn something.... :applaud:

A lot of people would rather sit on their backsides and post to forums than do any REAL work.


http://mirror2.ipdb.org/files/1580/Stern_1979_Meteor_Manual.pdf

Navigation

[0] Message Index

[#] Next page

[*] Previous page