| Main > Main Forum |
| T-Molding for quarter inch wood |
| (1/3) > >> |
| cigardude:
Hi everyone. I've been searching for some 1/4" t-molding but no luck. Has anyone ever used it before? Do you have any other suggestions to finish the edges? |
| PL1:
How about something like GRE34078A. Scott |
| eds1275:
I would just get some regular and follow any one of the methods opn this site for trimming. The sharp chisel seems to be the most popular, but I have had luck with a veneer trimmer tool that only does one side at a time that is available at home depot for $7. |
| jdbailey1206:
My understanding is that they only sell .5" to 1.5" sizes. I've never heard of anything as small as 1/4". If its possible I would get 1/2" material for your build. If you have already built your machine I would have to agree with eds. But keep in mind if you go with a trimmer you won't have a smooth rounded edge. It will be noticeable when you trim it. |
| Nephasth:
Use a round over bit with your router. |
| Navigation |
| Message Index |
| Next page |