| Main > Main Forum |
| Drilling plexiglass |
| << < (4/4) |
| spystyle:
I never had trouble drilling plexi, I use normal drill bits (not pointed) as they are somewhat round on the tip, and I set my drill to run backwards. I drill through at high speed and it kinda melts through. Craig |
| ahofle:
If using a regular drill (i.e. not router), I found that high speed + low pressure (so it melts like spystyle said) works the best. Pressing down too hard causes the cracking. |
| Navigation |
| Message Index |
| Previous page |