Main > Main Forum
Wire colors
<< < (2/3) > >>
wp34:

--- Quote from: yotsuya on October 08, 2013, 11:31:19 am ---I just buy cheap JAMMA harness on Ebay and cannibalize the wiring. Works great.

--- End quote ---

That's a good idea.
yotsuya:

--- Quote from: wp34 on October 08, 2013, 11:35:56 am ---
--- Quote from: yotsuya on October 08, 2013, 11:31:19 am ---I just buy cheap JAMMA harness on Ebay and cannibalize the wiring. Works great.

--- End quote ---

That's a good idea.

--- End quote ---

Someone here mentioned it. I thought it was a great idea and have used it ever since. So much nicer, especially with the ground daisy chain. Plus, you can use the same color coding for both sides.
jdbailey1206:
The colors don't really matter.  If you feel comfortable with using the same color for all players or different colors for different players than by all means do it.  Just remember so things don't get too confusing use black for your ground.   Also if you are OCD like me you can use one of these to know what wire is connected to each button from your controller interface.  (iPac, GP Wiz40, etc.)
TopJimmyCooks:
Black with black labels with black letters on the labels.  You know, so you can tell what's what.
PL1:
Paradise Arcade has the rainbow packs (16 wires, 8 colors) of pre-crimped 1-meter wires as well as red or black daisy chains.

All available in .110", .187", or .250".


Scott
Navigation
Message Index
Next page
Previous page

Go to full version