Main > Main Forum

ServoStik Questions

Pages: << < (2/2)

severdhed:

The servo stick is a modified jlw, there are lots of ball top options...I used the handcandy ball tops from groovygamegear on my JLW sticks and they are really nice. I under mounted mine in 3/4" mdf with 1/8" plexi on top. I used a router to recess then about half the thickness of the mdf, I think the height of them is perfect this way.

http://groovygamegear.com/webstore/index.php?main_page=product_info&cPath=70&products_id=368

Sent from my Galaxy SIII using Tapatalk.


markronz:

Thanks for the info!   I did actually hear back from Andy today at Ultimarc as well.  He said this:

"The shaft is standard Sanwa JLW which has a 6mm thread. So standard ball tops from other suppliers can be used"

So it sounds like I should be able to find a hollow stick from Paradise Arcade if I decide to go with a LED joystick.  Otherwise, I could just seemingly find a balltop from Paradise or GGG (and I'm sure other sites) as well!   So I think I'm all set on this topic.  Thanks for the help everyone!

Pages: << < (2/2)

Go to full version