Author Topic: Digital Printing and Cut Graphics (Read 67906 times)

Lucian045 · « **Reply #80 on:** April 20, 2017, 07:14:00 am »

Still here and still printing. Drop me a line if you need something. Thanks

thepro8 · « **Reply #81 on:** May 15, 2017, 04:04:15 pm »

Hi.

I saw the recommendations for digital printing from others. I'm looking for an control panel printout for an arcade I'm building. It will be about 37" x 20" Its a NES theme like below so a little simple. I's also like to get a NINTENDO decal for the marquee. What do you need from me and what is an estimated price for this?

Lucian045 · « **Reply #82 on:** May 18, 2017, 07:56:28 pm »

Send me an email to bjbowman045@gmail.com and we can discuss what you need. Thanks.

extracampine · « **Reply #83 on:** June 10, 2017, 03:42:57 am »

Where are you located Brad?

Lucian045 · « **Reply #84 on:** June 18, 2017, 09:25:48 am »

I'm in CT

Lucian045 · « **Reply #85 on:** July 10, 2017, 08:57:22 pm »

Just a quick update, still taking orders. Thanks for everyone who has contacted me so far. Need a quote send it to bjbowman045@gmail.com. Happy building!

Lucian045 · « **Reply #86 on:** August 30, 2017, 06:25:10 pm »

Just keeping the thread current. Thanks for the orders so far. Let me know if you need something.

Lucian045 · « **Reply #87 on:** October 04, 2017, 07:00:00 pm »

Yes still printing, let me know what you need.

Lucian045 · « **Reply #88 on:** November 21, 2017, 10:13:28 am »

Still here all...send me an email bjbowman045@gmail.com if you need something. Thanks.

ivwshane · « **Reply #89 on:** December 25, 2017, 11:13:16 am »

For marquees do you do translite? Or only reverse printing?

ChanceKJ · « **Reply #90 on:** December 25, 2017, 11:11:32 pm »

Lucian045 · « **Reply #91 on:** December 26, 2017, 09:41:13 am »

I do both reverse printing and translites. However, the Translite I use is a film that must be applied to the Plexi. If you need anything please send an email bjbowman045@gmail.com. Merry Christmas everyone and here's to 2018!

Cilrider · « **Reply #92 on:** January 08, 2018, 11:05:26 am »

Lucian was great to work with! After our email correspondence, he suggested I give me a phone call to talk through logistics of the art. His insight into the world of vinyl and arcade graphics is well worth the price. I messed up the first time with my marquee and all it took was a quick email to get a new one. He's super helpful and gives a high quality product. Thanks again!

Lucian045 · « **Reply #93 on:** January 11, 2018, 07:01:04 pm »

Thanks Cilrider...appreciate the feedback and post. I'm here if anyone needs anything. Email is best.

ModRetro · « **Reply #94 on:** April 09, 2018, 03:02:30 pm »

Brad,

You still in business? I'm looking for some possible vinyl print work. (The links at the beginning of this post do not come up successfully for me).

-Nick

Lucian045 · « **Reply #95 on:** April 09, 2018, 08:47:51 pm »

Yes I am...shoot me an email bjbowman045@gmail.com.

Lucian045 · « **Reply #96 on:** May 22, 2018, 10:21:42 pm »

Still taking orders... bjbowman045@gmail.com. Thanks everyone!

shaowebb · « **Reply #97 on:** June 24, 2018, 12:18:30 am »

Promised I'd post about the graphics I got once I finished our projects and danged if I didn't take a year with all the career junk lol.

Anyhoo I'm a first time cabinet dude so I hadn't really anything to go on. I wanted to build something without a stick and with kiosk style controller arms instead using 8bitdo controllers. I have some kiosk 2.0 arms I'll put on later that look a bit cleaner, and I got 1cm off on the bezel due to a fan cutting short the room my monitor had. Not bad though for a first time try on a retropie bartop. I can cleanup the bezel issues and arms but I wanted to get this up here for folks to look at. As you can tell from all that shine on the cabinet these prints are super glossy and nice. And no their is no graphic blurs on the prints. I have a tremor in my hand so it made the long exposure on the cab shot look slightly off. Tremor is awesome for shmups and rapid fire but not so much for camera lol.

Graphics I got were super high quality durable vinyl stickers. No problem putting them on and they were completely accurate without blemish to what I sent him. Plus we also had vinyl sheets of art printed for a seperate card project. My wife programmed some NFC chips to lay on blank playing cards and we got smash bros graphics printed for each amiibo we were cloning to our NFC cards. End Result was the least space consuming amiibo ever in deck form.

Quote

Lucian045 · « **Reply #98 on:** September 02, 2018, 04:06:00 pm »

Hey all...still printing graphics for the community, let me know what you need. Thanks.

Lucian045 · « **Reply #99 on:** November 02, 2018, 07:39:29 pm »

Hey all...still printing graphics for the community, let me know what you need. Thanks.

nolatron · « **Reply #100 on:** November 07, 2018, 02:48:58 pm »

Can you also do a something like regular paper print? Basically, something to use as a control panel drill template printout.

Lucian045 · « **Reply #101 on:** November 14, 2018, 05:07:03 pm »

yes I can

Lucian045 · « **Reply #102 on:** December 19, 2018, 07:11:22 am »

Just a reminder, still taking orders but please email me, bjbowman045@gmail.com, PM's don't always go thru for some reason. Thanks for the orders and Merry Christmas everyone.

Lucian045 · « **Reply #103 on:** February 11, 2019, 10:59:05 am »

Just updating the thread, still printing. Thanks for those who contacted me.

Gilrock · « **Reply #104 on:** February 11, 2019, 11:42:04 am »

Nice I didn't notice you were in this forum. FYI BYOAC'ers this is where I've gotten my vpin and arcade cabinet graphics printed. Great to work with and nice results.

Lucian045 · « **Reply #105 on:** March 08, 2019, 12:31:58 pm »

Hey all, made a quick video for trimming graphics when using T-Molding and also how to remove fine scratches when the application process.

Lucian045 · « **Reply #106 on:** May 13, 2019, 04:21:42 pm »

Still printing...send me what you need, Thanks

Lucian045 · « **Reply #107 on:** August 20, 2019, 08:12:31 pm »

Still printing for the community, email bjbowman045@gmail.com for a quote, thanks.

Lucian045 · « **Reply #108 on:** February 18, 2020, 02:42:53 pm »

Been a while since I updated. Still printing for the community, email bjbowman045@gmail.com for a quote, thanks.

Brad

CitznFish · « **Reply #109 on:** September 08, 2020, 08:52:50 pm »

I just received my artwork from Brad. Brad is easy to deal with, and the quality of the printing and the quality of the media are fantastic! I could not be happier.

I'll post images once my cab is complete and the artwork is in place.

Thanks again Brad!

Lucian045 · « **Reply #110 on:** September 12, 2020, 07:32:28 pm »

Quote from: CitznFish on September 08, 2020, 08:52:50 pm

I just received my artwork from Brad. Brad is easy to deal with, and the quality of the printing and the quality of the media are fantastic! I could not be happier.

I'll post images once my cab is complete and the artwork is in place.

Thanks again Brad!

Your'e very welcome, Thanks for the business!

Lucian045 · « **Reply #111 on:** November 29, 2020, 04:50:39 pm »

Still printing for the community, email bjbowman045@gmail.com for a quote, thanks.

Brad

Lucian045 · « **Reply #112 on:** April 02, 2021, 11:43:18 pm »

Still printing for the community, email bjbowman045@gmail.com for a quote, thanks.

Brad

misternolove · « **Reply #113 on:** July 02, 2021, 01:16:53 pm »

Amazing work Brad! Will be reaching out

bucky5oh · « **Reply #114 on:** July 14, 2021, 02:53:06 pm »

Hey Brad! I just emailed you last night for a quote. Looking forward to hearing from you. Your work looks killer!

Lucian045 · « **Reply #115 on:** August 04, 2021, 02:39:47 pm »

For everyone who orders thru me please share your experience on the thread. I don't check this thread too often, its all word of mouth.
I'm still printing for the community and will be for a long time, retirement is a ways off. Email bjbowman045@gmail.com for a quote, thanks again for all the orders.

Brad

SNAAKE · « **Reply #116 on:** October 12, 2021, 03:44:08 pm »

pm sent

Lucian045 · « **Reply #117 on:** January 27, 2022, 07:08:49 pm »

Happy New Year everyone! If you need artwork please email bjbowman045@gmail.com for a quote, thanks again for all the orders.

Brad


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	*--- Bug Reports ---*		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news