Main > Main Forum

Made my own williams multigame CP (with a little customisation)

Pages: (1/2) > >>

subzero1970:

hi all, first post here and i thought i'd share this control panel i made on saturday, this was my 2nd attempt, my first attempt was based on guesswork and most of the buttons were in the wrong places, so i got a CPO printed, used that as my template and got to work!























Im pretty happy with how it came out, considering its only my 2nd ever attempt!


Minwah:

Looks good!

subzero1970:

thanks - all the buttons except the start buttons are gold leaf, and the sticks are sanwas, hard to believe they are microswitches as i can hardly hear em!

paigeoliver:

Robotron NEEDS a round joystick movement pattern if you want any hope of being good at it. Looks like those are square or octagonal. I thought I could get away with a square pattern on my multiwilliams and I replaced them within 2 days.

subzero1970:


--- Quote from: paigeoliver on September 30, 2013, 02:27:27 pm ---Robotron NEEDS a round joystick movement pattern if you want any hope of being good at it. Looks like those are square or octagonal. I thought I could get away with a square pattern on my multiwilliams and I replaced them within 2 days.

--- End quote ---

seems to work fine for robotron, and besides im not sure what you mean...

Pages: (1/2) > >>

Go to full version