Main > Main Forum
Has anyone gotten x360ce working with an Ultrastick 360?
<< < (2/4) > >>
surface tension:

--- Quote ---Do you have some other program like xpadder also posting direction keys based on the u360 position?

I don't have any experience with the u360s but I've messed around with x360ce a fair amount and it seems to work with any dinput controller, even fake ones generated by vJoy.

--- End quote ---
No, nothing else going on. Yes, I've been reading through a lot of your posts and expected it to work like this.


--- Quote ---Have you tried the Xinput hack (based on x360ce but you edit an .ini file instead).
http://files.arcadecontrols.com/details.php?image_id=3656&mode=search

--- End quote ---
Not tried that, so I'll give that a go next. Thanks.
surface tension:
Finally got around to trying the Xinput hack out but didn't have any joy. Isn't this for keyboards? There is no movement on the test screen, but I get feedback when I press arrow keys on the keyboard.
NickG:
I am using U360 w/ x360ce for some steam games and do not have drifting problems in those I've tried.   I may have had to increase deadzones for some games, but I cannot remember for certain.  The deadzone are set to 0 in x360ce ini files and my ultramaps are set to the default analog.  For axis/Iaxis, etc., I get 0:0 with my joystick centered in the x360ce configuration screen, even though my joysticks rest at a center with raw feedback not at mid value of 32767' per the other screen.  So I guess verifying mapping, then deadzone increase in either the x360ce or the games files may be my only suggestions.
surface tension:
Thanks NickG, that's interesting. Some games work out of the box without x360ce, but I haven't got any to work using it.

The ones I have tried to use x360ce with seem to be fully asserted to the left, but you can get a bit of up and down out of it. I'll have a play around with what you've mentioned.

I've also been in touch with Andy @ Ultimarc and he's suggested there may be a possible firmware modification for this. I'll keep this thread updated.
surface tension:
There's a possible future firmware update for this. In the mean time, I'm using the 360 in output mode, so all signals are coming from the minipac. I'm sure I read of people feeding keystrokes into x360ce, but I can only see options for button 1, 2, 3 etc. Can anyone shed any light on how to use key strokes?

I'll also give the Xinput hack another try.

Thanks
Navigation
Message Index
Next page
Previous page

Go to full version