| Main > Main Forum |
| [SOLVED] Car game config with a joystick |
| << < (2/3) > >> |
| PL1:
--- Quote from: gezy on September 27, 2013, 02:40:42 pm ---I have installed the firmeware without customization. --- End quote --- Which firmware -- USB/HID Joystick or MAME Encoder (Custom)? --- Quote from: gezy on September 27, 2013, 02:40:42 pm ---Now (tested in street fighter) the button seems to work, but not the joystick, nothing move... --- End quote --- If you were on a Windows machine, I would ask you to use the gamepad tester in Control Panel or the keyboard tester in KADE Loader to see if the control panel wires were connected to the right inputs on the KADE. Right now, I'm not sure which firmware you are using, I'm not sure what switch you have wired to which input on the KADE, and I'm not sure how to test gamepads/keyboards using a RasPi. :dizzy: Any suggestions from RasPi users on ways to test gamepads and/or keyboards using a RasPi? Scott |
| paigeoliver:
I almost suspect that you have your microswitches wired up wrong. |
| gezy:
Ok, I've done some tests. USB/HID Joystick Encoder (Custom) The buttons works, but not the joystick MAME Encoder (Custom) The joystick works perfectly, but not all the buttons :hissy: Buttons 1 and 2 work once after clicking a lot of times ! Button 3 works very well. In this config, button 1 = L/CTRL and button 2 = L/ALT. I thing this is really the problem :angry: MAME Encoder (Multi-Mode) Everything works well but the car games... In my first post, I told you that in metal slug I can't run and shoot at the same time. In fact I was wrong. Th only issue is the the games like : * Drive out * Hang-on * Hydra * Ironman I'm using MAME 0.37b5 on Raspbian, and I don't have an Option menu like in Windows for enabling the joystick. :cry: :banghead: |
| PL1:
--- Quote from: gezy on September 28, 2013, 03:14:06 pm ---MAME Encoder (Custom) The joystick works perfectly, but not all the buttons :hissy: Buttons 1 and 2 work once after clicking a lot of times ! Button 3 works very well. In this config, button 1 = L/CTRL and button 2 = L/ALT. I thing this is really the problem :angry: --- End quote --- Looks like the answer is to change your Button 1 and Button 2 settings to keys that aren't used on your system like "J" and "L". Bring up the KADE Loader program and select the "MAME Encoder (Custom)" firmware. Click on the "Customise" button at the bottom. - Change Pin A7 "P1, Button 1 (L/CTRL)" to "P2, Button 7 (J)" (or other unused key) - Change Pin A8 "P1, Button 2 (L/ALT)" to "P2, Button 8 (L)" (or other unused key) - "Save" Program the KADE with your customised firmware. Launch MAME and press Tab to bring up the menu. In the "Input (General)" menu select "Player 1 Controls". Highlight "P1 Button 1", press "Enter", then press your P1 Button 1. Highlight "P1 Button 2", press "Enter", then press your P1 Button 2. That should have you up and running. If you changed the input settings for a particular game, go to the "Input (this Game)" menu, highlight the input you want to reset, and do this: - Press Enter - Press Esc -- clears input to "none" - Press Enter - Press Esc -- sets input to the setting defined in the "Input (General)" menu Scott |
| gezy:
Dammed, IT WORKS !!! :notworthy: Thank a lot man ! So the solution was : --- Quote ---Looks like the answer is to change your Button 1 and Button 2 settings to keys that aren't used on your system like "J" and "L". Bring up the KADE Loader program and select the "MAME Encoder (Custom)" firmware. Click on the "Customise" button at the bottom. - Change Pin A7 "P1, Button 1 (L/CTRL)" to "P2, Button 7 (J)" (or other unused key) - Change Pin A8 "P1, Button 2 (L/ALT)" to "P2, Button 8 (L)" (or other unused key) - "Save" --- End quote --- Cheers :cheers: |
| Navigation |
| Message Index |
| Next page |
| Previous page |