Main > Driving & Racing Cabinets

Let's compare M2 force feedback settings

(1/5) > >>

BadMouth:
I was setting up model 2 emulator from scratch on the new PC and the force feedback didn't feel right.
Then I remembered that I had messed with the settings in the .ini years ago.

It's been so long, I don't remember if I got these settings somewhere or came up with them myself.  :P
I also cranked the overall strength up to 150% in Logitech Profiler.

Anyone else mess around with them and come up with something different?

;FORCE EFFECTS PARAMETERS
;FE_CENTERING Effect (Spring centering effect)
FE_CENTERING_Gain=1.0      ;Global gain FE_CENTERING_Coefficient=10000   ;0-10000
FE_CENTERING_Saturation=10000   ;0-10000
FE_CENTERING_Deadband=100   ;1%

;FE_CLUTCH Effect (Friction, wheel turn hardness)
FE_CLUTCH_Gain=1.0      ;Global gain
FE_CLUTCH_Coefficient=10000   ;0-10000

;FE_LEFT,FE_RIGHT (Constant force in a direction)
FE_LEFT_Gain=2.0      ;Global gain
FE_LEFT_Magnitude=10000      ;0-10000
FE_RIGHT_Gain=2.0      ;Global gain
FE_RIGHT_Magnitude=10000   ;0-10000


;FE_UNCENTERING (Sine force, wave the wheel, rumble)
FE_UNCENTERING_Gain=10.0      ;Global gain
FE_UNCENTERING_Magnitude=10000   ;0-10000
FE_UNCENTERING_Offset=-200
FE_UNCENTERING_Phase=0
FE_UNCENTERING_Period=56000

vandale:
Hi Badmouth.

I am setting up force feedback for the first time in M2 and am having issues, I am hoping you can assist me to solve this problem.

I have a logitech momo black version. I have the latest logitech profiler installed. I can add model 2 as the game, do I just choose the exe?

When in game I get no feedback. I have changed the ini to enableFF=1. My device shows up in the profiler fine and I can config ok. I have force feedback enabled in the profiler also.

I have set daytona to deluxe. Have tried single and multi cpu versions. Am running xp with latest direct x, updates and drivers.

Thanks

BadMouth:
Sounds like your settings are right and I use that same wheel.

The only other thing I can think of is make sure x-input isn't enabled in the ini.

I'd skip profiler until you have it working outside of it.  Profiler isn't necessary, it just allows tweaks per exe.

There was an issue with supermodel where you had to have roms with the ffb board.  Never heard of that with m2, but if you've exhausted all other possibilities, try a different rom.

Will post if I think of anything else.

sent from my phone while driving

Jollywest:
I posted my M2 FFB settings a bit ago in the below thread, if it helps;

http://forum.arcadecontrols.com/index.php/topic,130376

vandale:
Ha ha, I figured it out. Was a late night......I forgot to plug on the power adapter   :applaud:

Navigation

[0] Message Index

[#] Next page