Main > Main Forum

Aim Trak Recoil Kit

Pages: << < (2/3) > >>

thrasherx:



--- Quote from: charlieram on September 16, 2013, 04:17:52 pm ---If you search on ebay you can probably pick up a couple of NAMCO NPC-103 G-CON guns for a fiver each, you can then use the trigger, trigger switch and side buttons as a straight swap in the new shells, That is what I did but as Andy told me the side button switches on his guns are tactile and in the Namco ones they are only membrane switches. Still work OK though

--- End quote ---

Awesome! Thanks for the tip. If I can't get the recoil ones like epicfatigue has, then I'll go this route.  I don't think I'll mind the membrane switches if the savings is roughly $40; that would be an insanely expensive switch.

charlieram:

One more thing to note, the front lens from the Namco guns are convex lenses and so are unsuitable for the Aimtrack modules but you could just leave them out or cut up a CD case or something similar to make the lenses, Good luck.

thrasherx:

Thanks.  Maybe I missed this, but do the AimTrak recoil kits have moving slides, or so they just vibrate?

charlieram:

The outside of the gun is just a solid shell but you get a reasonably heavy solenoid that jolts the gun, It's not a vibration more of a kick back.

thrasherx:



--- Quote from: charlieram on September 17, 2013, 02:25:45 pm ---The outside of the gun is just a solid shell but you get a reasonably heavy solenoid that jolts the gun, It's not a vibration more of a kick back.

--- End quote ---

Sounds like it's worth doing. Thanks.

Pages: << < (2/3) > >>

Go to full version