| Main > Main Forum |
| Ipac 4 Default Keycode Problems |
| (1/5) > >> |
| xer0s:
I have a 4 player cabinet with 6 buttons on each player. I noticed this problem when I was playing TMNT on Mame. When I press buttons 5 & 6 for player 2, it moves player 3 up & down. I realize 6 buttons aren't needed for TMNT and most other games, but it still shouldn't be doing this. I went to a game that requires at least 5 buttons (MK3), and tested out button 5 on player 2 and it didn't work. So I checked the default keycodes at http://www.ultimarc.com/ipac2.html and found that input 2 SW 5 and 2 SW 6 are mapped with the same keys as 3 UP and 3 DOWN. Does this not interfere with games that require 3 or 4 players and 5 or 6 buttons? I have emulators for Atari, Nes, Snes, Sega, and of course Mame. What's the best way of going about this? |
| blacketj:
Interesting. Maybe this is set up this way because it is defaulted for MAME, and you should not have a reason to be using the 5&6 buttons when playing a game that has more than two players. In any case, I would just use Ultimarc's software reprogram the controller. Shouldn't take you too long to figure out, it is fairly straight forward with decent documentation. You just need to find a couple more keys to use on the keyboard for player 3's up and down. Then make the appropriate changes in the input settings of your emulators. |
| xer0s:
Alright, but why does button 5 & 6 not work when I'm playing a two player only game? |
| yotsuya:
By default, MAME doesn't map buttons 5 and 6 for player two. |
| PL1:
There are actually two more overlapping keys -- both Player 2 Button 5-8 and Player 3 directional default keys use I, K, J, and L. Pretty sure the overlap started with Andy choosing default buttons for the IPac2 which became accepted as pseudo-defaults. Just reprogram the IPac to "deconflict" the overlaps. Scott |
| Navigation |
| Message Index |
| Next page |