| Main > Main Forum |
| Problem to connect P99L Guns to the PC |
| (1/1) |
| Espetero:
Hi guys, this is my first post, and i come with a difficult one. I´m finishing my arcade cabinet, a First Games Light of Covielsa, and i found two P99L Laser Blaster Logic 3 guns for ps2 at sunday market, very cheap, with a ps2/usb converter free. Searching for drivers, not found the originals, only found two of them compatibles: 1. http://www.hkems.com/download%20-%20TopGun2.htm 2. Smog drivers. The first have an aplication called TopGun Control Panel to configure, and the second a GunCon2 ControlPanel, that are similiar, but GunCon2 ControlPanel not recognize anything. The guns have various selectors, one of them select the mode of function: normal, guncon, guncon2. They have 3 types of connection, one male/female rca video, ps2 conection and usb conection. I connect to my computer (winXP sp3) with the drivers, open TopGun Control Panel and make the following: CONECTING USB OF THE GUN TO COMPUTER Normal mode: windows and TopGunCP do not detect GunCon mode: windows and TopGunCP do not detect Guncon2 mode: usb music dindong. TopGunCP recognize. Only detect the pulsation select, start y left botton CONECTING WITH PS2/USB CONVERSOR Normal mode: windows and TopGunCP do not detect. If shot, have recoil GunCon mode: windows and TopGunCP do not detect. If shot, have recoil Guncon2 mode: usb music dindong. TopGunCP do not recognize. CONECTING USB AND PS2/USB CONVERSOR Normal mode: windows and TopGunCP do not detect. If shot, have recoil GunCon mode: windows and TopGunCP do not detect. If shot, have recoil Guncon2 mode: usb music dindong. TopGunCP recognize. Only detect the pulsation select, start y left botton. If shot, have recoil I probed smog drivers too, make the same with TopGunControlPanel, GunCon2 ControlPanel do not recognize anything. How i can make the guns run on the cabinet? Does anyone have some working? Sorry my poor english. Thanks and regards. |
| Navigation |
| Message Index |