Main > Main Forum
Mortal Kombat Komplete $8 at greenmangaming (activates via steam)
severdhed:
i wish there were demos for these steam games. i am just setting up a new cabinet, and i'm not sure of the capabilities of this laptop i'm using...i'd love to try out this game without buying it first. i hate to buy a game and not know if it will run properly.
i'm not sure the radeon hd 4250 will cut it
Fursphere:
--- Quote from: severdhed on August 25, 2013, 11:50:46 pm ---i wish there were demos for these steam games. i am just setting up a new cabinet, and i'm not sure of the capabilities of this laptop i'm using...i'd love to try out this game without buying it first. i hate to buy a game and not know if it will run properly.
i'm not sure the radeon hd 4250 will cut it
--- End quote ---
Min:
Graphics:NVIDIA GeForce 8800 GTS | AMD Radeon 3850 or better
Recommended
Graphics:NVIDIA GeForce GTX 560 | AMD Radeon HD 6950 or better
From the Steam store page.
I'm running a GTX 460 and it runs fine. I haven't tried it on my 8800 GT machine yet.
DGP:
--- Quote from: DeLuSioNal29 on August 25, 2013, 08:58:41 pm ---I'll have to try more experimenting with offline mode as well.
It is, however, possible to run the game straight from the .exe in the folder. It seems to run flawlessly with one exception: When you exit the game there is an error that pops up on the screen with a dialogue box. Can't recall it at the moment but the game doesn't like it. Anyone else try it this way?
DeLuSioNaL29
--- End quote ---
Mine loads and exits correctly (Maximus Arcade using your trick) but it changes the resolution to what I have Maximus set for and it is the only PC based game I have that does that. :dunno
Jason
BadMouth:
--- Quote from: DGP on August 26, 2013, 06:14:28 am ---Mine loads and exits correctly (Maximus Arcade using your trick) but it changes the resolution to what I have Maximus set for and it is the only PC based game I have that does that. :dunno
Jason
--- End quote ---
I had this problem with some of the Taito Type X games.
You can write an autohotkey script that launches the game and then resets the resolution when the game exits.
I just had it execute when the ESC key was pressed (my exit button)
Since you're actually navigating and exiting out of the game, you'd probably use the ifwinactive command.
--- Code: ---Run, AH30-PC4-fullscreen.exe
ESC::
Process, Close, AH30-PC4-fullscreen.exe
cD = 32 ; bits (quality) - you can change to suit your requirments
sW = 1920 ; pixels - you can change to suit your requirments
sH = 1080 ; pixels - you can change to suit your requirments
rR = 60 ; Hz (frequency) - you can change to suit your requirments
ChangeDisplaySettings( cD, sW, sH, rR )
ExitAPP
Return
ChangeDisplaySettings( cD, sW, sH, rR ) {
VarSetCapacity(dM,156,0), NumPut(156,dM,36)
DllCall( "EnumDisplaySettingsA", UInt,0, UInt,-1, UInt,&dM ), NumPut(0x5c0000,dM,40)
NumPut(cD,dM,104), NumPut(sW,dM,108), NumPut(sH,dM,112), NumPut(rR,dM,120)
Return DllCall( "ChangeDisplaySettingsA", UInt,&dM, UInt,0 )
}
--- End code ---
(Do not change anything below the Return line.)
EDIT: Maybe I misunderstood your issue. My issue is that the game would change the desktop resolution and when I went back to the front end, it would be messed up because the resolution was wrong. If it's that the game is running at a lower resolution, then you could modify this to change the desktop resolution before launching the game.
DeLuSioNal29:
--- Quote from: severdhed on August 25, 2013, 11:50:46 pm ---i'm not sure the radeon hd 4250 will cut it
--- End quote ---
My cab has an HD 4xxx series card (HD4670) and it runs fine. Keep in mind that you are running it in a low resolution so it will run a bit faster.
D