| Main > Main Forum |
| Atari Yoke (Star Wars) Plug Wiring Diagram |
| (1/1) |
| kaptaink_cg:
I recently purchased an Atari Star Wars yoke and hooked it up to a U-HID controller. I wanted to keep the yoke as original as possible, so I found the appropriate molex plug and wired the U-HID into that. At the time I wasn't able to find any wiring diagrams for the yoke plug, so I created one for others to use. Attached below! |
| italiandoh:
Cool, thanks for sharing it :cheers: |
| PL1:
Ninten-doh posted a version here. Based on an observation by Gray_Area, I updated the image to indicate X and Y axis. Also, If you are using the :angry: RAM Controls USB adapter, the triggers and buttons are as follows: Pin 1 = HID Button 1 Pin 2 = HID Button 4 Pin 3 = HID Button 3 Pin 4 = HID Button 2 Twisty Wrist has the best price on the connectors that I've found. Scott |
| Navigation |
| Message Index |